Shift cable for 1972 Super Sport
#1
Senior Member
Thread Starter
Join Date: Aug 2012
Location: Los Alamitos, Calif.
Posts: 2,475
Bikes: Canyon Endurace
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1041 Post(s)
Liked 923 Times
in
540 Posts
Shift cable for 1972 Super Sport
I'm putting a 1972 Schwinn Super Sport back together and the pancake end of the cable that is attached to the shift lever is considerably thinner than what is out there (new). Newer, thicker cable ends do not fit into the shifter slot. Does anyone still make these thin ones or do I have to file, crush or sand them down in order to fit properly?
#5
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,075
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,859 Times
in
2,307 Posts
J&B Importers carries said cables. If your LBS has an account with them they can add a few cables to their next order and likely not charge you for any shipping. If you're fixing up such an old bike having a relationship with a lbs will be a good thing more then once JBI - Product Details Andy
__________________
AndrewRStewart
AndrewRStewart
Thread
Thread Starter
Forum
Replies
Last Post
specialmonkey
Classic & Vintage
5
03-01-17 11:53 PM