Removing Di2 Battery from seatpost
#1
Senior Member
Thread Starter
Join Date: Jul 2018
Location: USA
Posts: 2,190
Bikes: Ti, Mn Cr Ni Mo Nb, Al, C
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times
in
349 Posts
Removing Di2 Battery from seatpost
I'm going to be switching seat posts soon and wanted to ask the community if there were any tips/tricks to removing the battery. Current setup is standard Shimano friction battery holder....not the lock ring type.
My guess is to carefully use pliers on the tabs to pull and rotate the assembly out from the post. Anyone done this before that could offer any insight? I just want to be prepared when the new seat post arrives.
Not much info using Google other than some people suggesting use of a coat hanger....but they do not explain how it is used, nor can I imagine it being an effective method.
Thanks
My guess is to carefully use pliers on the tabs to pull and rotate the assembly out from the post. Anyone done this before that could offer any insight? I just want to be prepared when the new seat post arrives.
Not much info using Google other than some people suggesting use of a coat hanger....but they do not explain how it is used, nor can I imagine it being an effective method.
Thanks
#2
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
For next time, maybe attach a string or ribbon so that you can more easily pull it out.
#3
Senior Member
Thread Starter
Join Date: Jul 2018
Location: USA
Posts: 2,190
Bikes: Ti, Mn Cr Ni Mo Nb, Al, C
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times
in
349 Posts
There must be some bike mechanics on here that have done this many times. Strange that the web has very little information on this.
#4
Senior Member
Join Date: Sep 2017
Posts: 7,872
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6958 Post(s)
Liked 10,959 Times
in
4,686 Posts
@TimothyH should be along any time now...
Likes For Koyote:
#5
Full Member
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 293
Bikes: Lynskey GR270
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 69 Times
in
49 Posts
If it's held by friction, not much else you can do but pull it out slowly... If you can shim the tube from a can of wd40, a small squirt may make it easier to pull out... but cleanup will be required.
#6
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
@TimothyH should be along any time now...
Looking at photos from my install, I would think that it could probably be pulled out by hand, or maybe pliers or a screwdriver to get it started as the OP has stated. Doesn't look like a big deal at all.
This is the Ritchie holder, not Shimano...
-Tim-
#7
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,842
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,821 Times
in
1,540 Posts
air pressure? compressor?
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#9
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,842
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,821 Times
in
1,540 Posts
true that...... but I also have almost put out an eye by trying to remove a valve core without letting the air out of a tire first.... so I should add "do this at your own risk"
and @ChinookTx I am from ChinookMt
and @ChinookTx I am from ChinookMt
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Thread
Thread Starter
Forum
Replies
Last Post
Lotus907efi
Bicycle Mechanics
5
07-05-19 04:11 PM