Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

RAGE!!! Tubeless Deep Profile rims and fishing nipples

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

RAGE!!! Tubeless Deep Profile rims and fishing nipples

Old 06-26-19, 10:39 AM
  #1  
ChinookTx
Senior Member
Thread Starter
 
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 289

Bikes: Lynskey GR270

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 68 Times in 48 Posts
RAGE!!! Tubeless Deep Profile rims and fishing nipples

I've been raging for a few hours last night trying to fish nipples through a tubeless deep profile rim. It only has an opening at the valve hole, so it's not easy to fish anything through. I've seen a few people that suggested using an air compressor and a piece of string in the spoke hole that is supposed to pop out the valve hole, attach nipple, fish through, repeat. I'm having limited success with that, it never seems to make it to the valve hole.

Any other tips people are using? Clearly, swearing doesn't work!
ChinookTx is offline  
Old 06-26-19, 11:06 AM
  #2  
AnkleWork
Senior Member
 
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702

Bikes: old clunker

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 103 Times in 81 Posts
Magnet.
AnkleWork is offline  
Old 06-26-19, 11:07 AM
  #3  
alcjphil
Senior Member
 
alcjphil's Avatar
 
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,318
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1539 Post(s)
Liked 1,221 Times in 724 Posts
This is how it is done for Campagnolo wheels. My Shamal wheels were shipped to me with a strong magnet and a steel mini spoke for just this purpose

alcjphil is offline  
Old 06-26-19, 11:15 AM
  #4  
ChinookTx
Senior Member
Thread Starter
 
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 289

Bikes: Lynskey GR270

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 68 Times in 48 Posts
I'm ashamed to say I didn't think of a cut off ferrous spoke screwed into the nipple and a magnet... Will give this a try tonight.
ChinookTx is offline  
Old 06-26-19, 11:17 AM
  #5  
ChinookTx
Senior Member
Thread Starter
 
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 289

Bikes: Lynskey GR270

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 68 Times in 48 Posts
Originally Posted by fietsbob View Post
1 extra spoke .. screw it on up side down, hold it against the end of the spoke and unscrew it from one
and start it on the other spoke..
.
Not sure I get what you're saying. Tubeless means there's no spoke hole on the inside of the rim, at least in this case.
ChinookTx is offline  
Likes For ChinookTx:
Old 06-26-19, 11:19 AM
  #6  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,599

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,339 Times in 847 Posts
I'll pass..

I feel no need to follow the latest trends you others feel compulsory ....

stainless wire for spokes may also not be magnetic either .. older Zn treated steel spokes may be what you want..








...

Last edited by fietsbob; 06-26-19 at 11:30 AM.
fietsbob is offline  
Old 06-26-19, 01:29 PM
  #7  
ChinookTx
Senior Member
Thread Starter
 
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 289

Bikes: Lynskey GR270

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 68 Times in 48 Posts
Originally Posted by fietsbob View Post
I feel no need to follow the latest trends you others feel compulsory ....

...
I honestly don't give a rat's butt what trends you follow or not. What I care about is you butting into every thread and giving your half-***** opinion in cryptic sentences that read like haikus.

It's not the 50s anymore, get on with it. Thanks to the others for their suggestions, off to the garage to give this another go.

Last edited by ChinookTx; 06-26-19 at 02:28 PM.
ChinookTx is offline  
Likes For ChinookTx:
Old 06-26-19, 02:27 PM
  #8  
ChinookTx
Senior Member
Thread Starter
 
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 289

Bikes: Lynskey GR270

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 68 Times in 48 Posts
Thanks for the video @alcjphil (and those who suggested magnets)!! 10 minutes with a magnet, a small nail cut short and threaded through the nipples and my wheel is all laced with spokes. Can't believe I didn't think of this yesterday...

ChinookTx is offline  
Old 06-27-19, 06:37 AM
  #9  
Phil_gretz
Zip tie Karen
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,005

Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '16 Motobecane Gran Premio Elite, '18 Velobuild VB-R-022, '21 Tsunami SNM-100

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1464 Post(s)
Liked 1,537 Times in 804 Posts
Fishing Nipples would be a good name for a rock band...
Phil_gretz is offline  
Likes For Phil_gretz:
Old 06-27-19, 07:51 AM
  #10  
Troul 
:D
 
Troul's Avatar
 
Join Date: Oct 2013
Location: Mich
Posts: 5,945

Bikes: RSO E-tire dropper fixie brifter

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,070 Times in 1,389 Posts
I've used fishing > string fed from the ext. spoke hole > between the rim channel > to the access point of the inner rim > then thru the center of the nipple - making a large enough knot - that will allow the nipple to be > pulled into place > as needed using the fishing string.
__________________
-Oh Hey!
Troul is offline  
Likes For Troul:
Old 06-27-19, 11:10 AM
  #11  
WizardOfBoz
Generally bewildered
 
WizardOfBoz's Avatar
 
Join Date: Aug 2015
Location: Eastern PA, USA
Posts: 2,945

Bikes: 2014 Trek Domane 6.9, 1999 LeMond Zurich, 1978 Schwinn Superior

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1108 Post(s)
Liked 300 Times in 225 Posts
Originally Posted by Phil_gretz View Post
Fishing Nipples would be a good name for a rock band...
Hilarious!

But this makes me think of putting the hook into them. Would be painful. And if a fish with sharp teeth took a bite - owww.
WizardOfBoz is offline  
Old 06-27-19, 11:13 AM
  #12  
WizardOfBoz
Generally bewildered
 
WizardOfBoz's Avatar
 
Join Date: Aug 2015
Location: Eastern PA, USA
Posts: 2,945

Bikes: 2014 Trek Domane 6.9, 1999 LeMond Zurich, 1978 Schwinn Superior

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1108 Post(s)
Liked 300 Times in 225 Posts
Quick electrical tape cover over all unfilled holes except the one you are threading. Stick the and of a string into that hole. Use a shop vac or dustbuster to suck the string through. Tie the stub spoke to the string (with nipple attached) and pull through. Would that work?

Last edited by WizardOfBoz; 06-27-19 at 11:48 AM.
WizardOfBoz is offline  
Old 06-27-19, 06:37 PM
  #13  
ChinookTx
Senior Member
Thread Starter
 
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 289

Bikes: Lynskey GR270

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 68 Times in 48 Posts
Originally Posted by WizardOfBoz View Post
Quick electrical tape cover over all unfilled holes except the one you are threading. Stick the and of a string into that hole. Use a shop vac or dustbuster to suck the string through. Tie the stub spoke to the string (with nipple attached) and pull through. Would that work?
It probably would work too! I feel dumb for not thinking about all these good ideas!
ChinookTx is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ericoschmitt
Road Cycling
4
04-29-21 01:32 PM
Ericoschmitt
Bicycle Mechanics
10
08-05-18 08:45 AM
vtje
Bicycle Mechanics
13
12-21-17 04:13 AM
LateStart
Bicycle Mechanics
0
05-27-16 08:13 PM
rpenmanparker
Road Cycling
12
09-21-15 10:30 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.