Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Trick to perfectly straight handlebars?

Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Trick to perfectly straight handlebars?

Old 07-03-19, 04:18 PM
  #26  
bocobiking
bocobiking
 
Join Date: May 2015
Location: Louisville, Colorado
Posts: 52

Bikes: 1974 Schwinn Paramount, 1974 Raleigh Super Course, 1984 Columbine, 1979 Richard Sachs, 2003 Serotta Legend Ti, 2005 Serotta Concours

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 4 Times in 2 Posts
I'm OCD about this; approximation won't do . Here's how I do it:

Angle bars and wheel about 45 degrees. Lay straightedge on edge along center of stem, making sure that straightedge extends beyond the ends of the stem. With one eye closed and standing over the straightedge, look to see if the front and back ends of the straightedge line up with the center of the tire in front of and behind the stem.

Takes me me a minute or so, and I never need to readjust on the road.
bocobiking is offline  
Old 07-03-19, 05:38 PM
  #27  
u235
Senior Member
 
u235's Avatar
 
Join Date: Mar 2017
Posts: 904
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 318 Post(s)
Liked 22 Times in 19 Posts
Depends on which eye I use to verify. Each look different. I swapped a stem the night before a 5 day 350 mile ride and already had my handlebar bag mounted up and on the car rack. When I was done with the trip and took off the bracket I had a WTF moment. I was WAY off. Oh well, did not seem to any impact
u235 is offline  
Old 07-11-19, 02:19 PM
  #28  
readability
Newbie
 
Join Date: Jun 2015
Location: Canada
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Line them up parallel with the fork crown. Even with a unicrown you can still do it.
readability is offline  
Old 07-12-19, 02:18 AM
  #29  
xroadcharlie
Senior Member
 
Join Date: Apr 2019
Location: Windsor Ontario, Canada
Posts: 93

Bikes: 2018 Giant Sedona

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Liked 13 Times in 12 Posts
Leaving the handlebars slightly off center and to the left makes up for the crown in on the roads here in North America where we do it right.

Others may need to offset the handlebars left.

I do it by holding the tire between my knees and line up the snug stem with the tire or top bar before tighting.

Last edited by xroadcharlie; 07-12-19 at 02:37 AM.
xroadcharlie is offline  
Old 07-12-19, 12:21 PM
  #30  
rumrunn6
Senior Member
 
rumrunn6's Avatar
 
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 22,899

Bikes: Bottecchia Sprint, GT Timberline 29r

Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 3029 Post(s)
Liked 114 Times in 92 Posts
twist your saddle the other way to compensate. sorry couldn't resist, it's Friday
rumrunn6 is offline  
Likes For rumrunn6:
Old 07-12-19, 03:41 PM
  #31  
Riveting
Senior Member
 
Join Date: Oct 2013
Location: Denver, CO
Posts: 478

Bikes: '13 Trek Madone 2.3, '13 Diamondback Hybrid Commuter, '17 Spec Roubaix Di2, '17 Spec Camber 29'er

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 164 Post(s)
Liked 22 Times in 16 Posts
Seriously, use a "line beam" laser pointer down the middle of the tire, and down the middle of the stem, then adjust stem to taste. Best $10 an OCD type can spend. Me? I couldn't care less about a few degrees of skew.
Riveting is offline  
Old 07-12-19, 03:53 PM
  #32  
79pmooney
A Roadie Forever
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 6,896

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1637 Post(s)
Likes: 0
Liked 60 Times in 51 Posts
Originally Posted by ronin4740 View Post
...

Thank God the seat post on the Giant TCR I'm riding isn't round or I'd be losing sleep over the nose of the saddle being something other than true (though I think it's even easier to fix with a plum bob!)
I figured out a few years ago that all my seats should be angled to the left. More comfortable. So I set them so the nose is just to the left of the left edge of the brake cable. (Centerline top tube routing like was common in the '80s.)

I do my stems like easyupbug (post #4 ). On a build, I simple do not tighten fully until the wheel is on. Before that I don't care.

Oh, quill stems are far easier to align, especially long ones. 180 quills are a piece of cake.

Ben
79pmooney is offline  
Old 07-12-19, 04:08 PM
  #33  
freeranger
Senior Member
 
freeranger's Avatar
 
Join Date: Jun 2005
Location: Kentucky
Posts: 1,177

Bikes: 06 Lemond Reno, 98 GT Timberline mtn.bike

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 36 Post(s)
Liked 21 Times in 14 Posts
There is no trick to it--it simply is not possible!!
freeranger is offline  
Old 07-12-19, 05:15 PM
  #34  
TiHabanero
Senior Member
 
Join Date: Nov 2012
Posts: 2,270
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Likes: 0
Liked 20 Times in 19 Posts
Been working in shops since 1983 and have yet to get a stem straight. I just cannot do it. On my own bikes I simply let live, but on a customer's bike I let them line it up!
TiHabanero is online now  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.