Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Trick to perfectly straight handlebars?

Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Trick to perfectly straight handlebars?

Old 06-27-19, 10:50 PM
  #1  
ronin4740
Senior Member
Thread Starter
 
Join Date: Jun 2019
Location: Reno Nevada
Posts: 56

Bikes: Giant TCR, Pure City Original Fixie, Fuji Roubaix, Raleigh M800

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 5 Times in 5 Posts
Trick to perfectly straight handlebars?

What's your secret to getting your handlebars dead straight?

The shop serviced my headset and the bar is slightly crooked. I took it back (the shop was on my training ride route this evening) and now it's a little crooked the other way. I made it better shortly after but it's still not bang on straight..

How do you guys do this?
ronin4740 is offline  
Old 06-27-19, 10:54 PM
  #2  
daoswald
Senior Member
 
Join Date: Apr 2008
Location: Salt Lake City, UT (Formerly Los Angeles, CA)
Posts: 1,023

Bikes: 2008 Cannondale Synapse -- 2014 Cannondale Quick CX

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 175 Post(s)
Likes: 0
Liked 26 Times in 14 Posts
Originally Posted by ronin4740 View Post
What's your secret to getting your handlebars dead straight?

The shop serviced my headset and the bar is slightly crooked. I took it back (the shop was on my training ride route this evening) and now it's a little crooked the other way. I made it better shortly after but it's still not bang on straight..

How do you guys do this?
Suspension of disbelief.

Try as I might, I never can get it perfect, so I have to choose to accept that it is perfect enough; suspension of disbelief, for the sake of enjoyment.
daoswald is offline  
Likes For daoswald:
Old 06-27-19, 11:54 PM
  #3  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 11,613

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1734 Post(s)
Liked 47 Times in 34 Posts
The two ways that I usually use are

1- try to line up the stem's extension with the tire. Variations on this are when you sight down and use the side of the stem and side of the tire or the stem's bar clamp over the tire's center.

2- Use the bars and drop outs to look down on. Sometimes the back side of the bars and or the axle work better.

When I have customers who are especially sensitive to this I sometimes present the bike to them with a not yet tightened fully stem. I ask them to set the alignment then I do the clamping.

BTW just like some people need seats that are slightly off line so do some need bars that are not centered and/or aligned. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Old 06-28-19, 12:36 AM
  #4  
cpach
Senior Member
 
Join Date: Oct 2009
Location: Santa Cruz, CA
Posts: 1,145

Bikes: Too many. Cannondale SuperSix, Trek Remedy 8, Trek Crossrip+ get the most ride time.

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 222 Post(s)
Likes: 0
Liked 5 Times in 5 Posts
https://en.tune.de/produkt/equipment/spurtreu.html

You could use a frickin laser.

But what Andrew said.
cpach is offline  
Old 06-28-19, 06:23 AM
  #5  
easyupbug 
Senior Member
 
Join Date: Jan 2013
Posts: 1,143

Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Likes: 0
Liked 5 Times in 5 Posts
On a new build w/o wheels as of yet I have placed a rod on across the front fork ends and set the bars, after built I sight down my front wheel making sure the spokes disappear evenly behind the tire and then center the stem on the tire before tightening.
easyupbug is offline  
Old 06-28-19, 06:36 AM
  #6  
andrewclaus
Senior Member
 
Join Date: Feb 2012
Location: Golden, CO
Posts: 1,513

Bikes: 2016 Fuji Tread

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 218 Post(s)
Likes: 0
Liked 16 Times in 14 Posts
After doing the best I can in the stand, I bring the Allen wrench(es) on a test ride and fine-tune it on the road.

Once in a while I get an old bike with very slightly bent bars. If you get the stem dead center, the bars feel crooked. If you align the bars, the stem looks off. Usually there's no way to notice that in the stand.
andrewclaus is offline  
Old 06-28-19, 06:56 AM
  #7  
AnkleWork
Senior Member
 
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,307

Bikes: old clunker

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 540 Post(s)
Likes: 0
Liked 25 Times in 15 Posts
Deductive logic:
1. No dimension like "perfectly straight handlebars" can exist in space-time.
2. So a tolerance on the misalignment will have to be specified.
3. The tolerance will have to be based on the observer's ability to perceive the misalignment.
4. Only the OP can explore their own ability to perceive.
AnkleWork is offline  
Likes For AnkleWork:
Old 06-28-19, 07:00 AM
  #8  
gregf83 
Senior Member
 
Join Date: Jun 2008
Location: Vancouver, BC
Posts: 8,747
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 895 Post(s)
Liked 22 Times in 16 Posts
The trick is to get it close and not worry about it. Your brain will adapt 1 2 seconds and you'll continue to ride in a straight line regardless of how straight your bars are.
gregf83 is offline  
Old 06-28-19, 07:54 AM
  #9  
DrIsotope
Non omnino gravis
 
DrIsotope's Avatar
 
Join Date: Feb 2015
Location: SoCal, USA!
Posts: 6,730

Bikes: Nekobasu, Pandicorn

Mentioned: 99 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 157 Times in 118 Posts
I stand over the front tire, holding it between my knees, and move the bars until they look perpendicular to the tire. Double-check by looking down over the stem from the riding position.

It's not about actually getting them straight, it's about thinking that they're straight. Perception is reality. If the bars look straight to you, they are. A degree or two to one side or the other isn't going to matter.
__________________
DrIsotope is offline  
Likes For DrIsotope:
Old 06-28-19, 10:28 AM
  #10  
ronin4740
Senior Member
Thread Starter
 
Join Date: Jun 2019
Location: Reno Nevada
Posts: 56

Bikes: Giant TCR, Pure City Original Fixie, Fuji Roubaix, Raleigh M800

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 5 Times in 5 Posts
*chuckle* some good answers and some funny answers in here - thanks all! I don't know why a couple of degrees out of true bothers me so much but it does...

If the SpurTru were $40.00 I'd probably buy one... But one of the guys in the comments below the review of the SpurTru suggested a plum bob. Maybe I'll go that route.

Thank God the seat post on the Giant TCR I'm riding isn't round or I'd be losing sleep over the nose of the saddle being something other than true (though I think it's even easier to fix with a plum bob!)
ronin4740 is offline  
Old 06-28-19, 10:33 AM
  #11  
mitchmellow62
Senior Member
 
Join Date: Aug 2014
Posts: 91
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I try to align the stem, top tube and wheel/tire standing still. Then I carry an allen wrench to adjust while on the road (but stopped, lol).. Eventually I stop obsessing, forget about it and just ride. That is, until I do something again with the front end that brings my attention to alignment and starts the obsessive process again.
mitchmellow62 is offline  
Old 06-28-19, 12:19 PM
  #12  
Retro Grouch 
Senior Member
 
Retro Grouch's Avatar
 
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 29,280

Bikes: Catrike 559 I own some others but they don't get ridden very much.

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1162 Post(s)
Liked 32 Times in 24 Posts
Originally Posted by Andrew R Stewart View Post
When I have customers who are especially sensitive to this I sometimes present the bike to them with a not yet tightened fully stem. I ask them to set the alignment then I do the clamping.
My system too.

Another trick is to align the handlebars with one eye closed.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
Retro Grouch is offline  
Old 06-28-19, 12:47 PM
  #13  
base2 
Senior Member
 
base2's Avatar
 
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 968

Bikes: N+1

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 509 Post(s)
Likes: 0
Liked 65 Times in 45 Posts
I have a groove between the tiles in my kitchen tile floor. Theres supposed to be more morter there than there is. I park the bike in the groove & measure the bar ends to the sliding glass door. Equal distance = perpindicular to bike. It works better with skinny tires, they fit floor groove better.

I've also installed bare rims on the bike, then zip tied the bare rims to a 2x4 I deemed "straight enough" and measured the bar ends to the seat post or some other suitable fixed reference (rear drop out, etc...) The idea being to get a clean measurement with out the influence of the tire mucking things up.
base2 is offline  
Old 06-28-19, 01:05 PM
  #14  
jadocs
Senior Member
 
jadocs's Avatar
 
Join Date: Jul 2018
Location: USA
Posts: 728

Bikes: Litespeed T2 Disc, Fondirest P4 Carbon, Fuji Cross 2.0, Specialized Fatboy

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 306 Post(s)
Liked 58 Times in 44 Posts
Learn how to adjust a headset, and align them yourself. Get it as close as you can by eye, then go out and ride it. If adjustments are required make them.
jadocs is online now  
Old 07-01-19, 09:00 AM
  #15  
Last ride 76 
Senior Member
 
Last ride 76's Avatar
 
Join Date: Nov 2013
Location: Just moved...1 km S. Now above the "Bike Path" ( River Road, Piermont, NY)
Posts: 868

Bikes: Old Bikes: '74 Ron Cooper, Crashed and repaired '76, restored 2015!!! need restoration '74 Witcomb track bike (bought in '75) '75 Carlsbad Masi, bought in '76 New bikes: 84-85 Gios torino "Professional" '76 Olmo Competition C Titiano

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 142 Post(s)
Liked 31 Times in 29 Posts
Originally Posted by DrIsotope View Post
I stand over the front tire, holding it between my knees, and move the bars until they look perpendicular to the tire. Double-check by looking down over the stem from the riding position.

It's not about actually getting them straight, it's about thinking that they're straight. Perception is reality. If the bars look straight to you, they are. A degree or two to one side or the other isn't going to matter.
I do it the same way. I was stunned that this is even an issue, until I read the second paragraph.
Last ride 76 is offline  
Old 07-01-19, 09:47 AM
  #16  
2old
Senior Member
 
Join Date: Jul 2014
Posts: 1,570
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 211 Post(s)
Likes: 0
Liked 8 Times in 7 Posts
I'm OCD about symmetry and line the handlebars up perpendicularly with some feature on the fork (like the brake bosses if the bike has "V" brakes) looking "over the bars" from above them. Able to get it "perfect" (means I can't perceive any unevenness) that way.
2old is offline  
Old 07-01-19, 12:17 PM
  #17  
krecik
Senior Member
 
krecik's Avatar
 
Join Date: Jun 2018
Location: Tredegar, Wales
Posts: 191

Bikes: coastie

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 60 Post(s)
Liked 21 Times in 13 Posts
I do it by eye, one eye closed while holding the tyre between the legs, and then get on the bike into riding position and assess it from my there. Of course, it's never perfect, as said by @AnkleWork it all depends on your perception of perfection.

Kret
krecik is offline  
Old 07-02-19, 05:55 AM
  #18  
CyclingFool95 
Senior Member
 
Join Date: Apr 2019
Location: Northern NJ
Posts: 151

Bikes: 1987 Pinarello Montello, 1995 Litespeed Classic, 1996 Colnago Master Light, 2006 Opera Leonardo FP

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 50 Post(s)
Liked 11 Times in 10 Posts
I just eyeball it. On my Litespeed, which is the bike I ride most often, they've been slightly off for years now. Every ride, I notice it, and by the time I get home I've forgotten to fix it again. It's much less of a deal than having the levers not level.
CyclingFool95 is offline  
Old 07-02-19, 06:18 AM
  #19  
Gresp15C
Senior Member
 
Gresp15C's Avatar
 
Join Date: Sep 2014
Posts: 2,627
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 633 Post(s)
Liked 33 Times in 29 Posts
Is your frame straight? I futzed with the handlebar on my commuter until I finally noticed that the fork is a bit crooked.
Gresp15C is offline  
Old 07-02-19, 06:51 AM
  #20  
Wilfred Laurier
Señor Member
 
Wilfred Laurier's Avatar
 
Join Date: Feb 2013
Posts: 4,281
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 326 Post(s)
Liked 63 Times in 44 Posts
The 'trick' is to loosen your definition of 'perfect'.

There are people who put a .0001" dial gauge on their wheels to determine if they are out of true, which results in thinking the wheel is out of true even if they could not have possibly known or felt the problem without the dial gauge. The solution to this is to lighten up and ride your bike.
Wilfred Laurier is offline  
Old 07-02-19, 07:06 AM
  #21  
Skipjacks
Senior Member
 
Skipjacks's Avatar
 
Join Date: Aug 2017
Location: Mid Atlantic / USA
Posts: 1,951

Bikes: 2017 Specialized Crosstrail / 2013 Trek Crossrip Elite

Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 940 Post(s)
Liked 151 Times in 98 Posts
I want you all to know I hate this thread.

3 years I've had my bike. I never noticed the handlebar wasn't perfectly straight.

Since I looked at this thread I instantly noticed that my bar is about 3-4 degrees off straight.

Now I can't unsee it.

(I'm kidding about hating anything, for the humorless among you. But suddenly seeing the bar being crooked is now driving me nuts. That part is true. )
Skipjacks is offline  
Old 07-02-19, 07:09 AM
  #22  
Leebo
Senior Member
 
Join Date: Aug 2009
Location: North of Boston
Posts: 5,422

Bikes: Kona Dawg, Surly 1x1, Karate Monkey, Rockhopper, Crosscheck , Burley Runabout,

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 744 Post(s)
Likes: 0
Liked 12 Times in 9 Posts
Ruler, measuring tape or large carpenters square all work for me.
Leebo is offline  
Old 07-02-19, 09:33 AM
  #23  
jadocs
Senior Member
 
jadocs's Avatar
 
Join Date: Jul 2018
Location: USA
Posts: 728

Bikes: Litespeed T2 Disc, Fondirest P4 Carbon, Fuji Cross 2.0, Specialized Fatboy

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 306 Post(s)
Liked 58 Times in 44 Posts
You need to take off any mounts/computer/lights off the handle bar because it will play tricks on you. Ensure the bike is level and hold the seat while observing from the rear. Make the necessary adjustments, double check, then go for a ride. Make final tweaks as required and you are done.
jadocs is online now  
Old 07-02-19, 06:32 PM
  #24  
63rickert
Senior Member
 
Join Date: Dec 2013
Posts: 1,062
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 481 Post(s)
Likes: 0
Liked 19 Times in 16 Posts
Bike shop is off the hook on this one. What looks perfect to me may be unrideable to you. Or if not unrideable at least crooked. The old old bike shop way to do this was to have the customer stand over the bike and tell the mechanic when it was straight. Half the time customers would be thrilled by the personal attention and half the time they would wonder if these guys had a clue. But it will never be straight. It might make you happy, it will not be straight.
63rickert is offline  
Old 07-02-19, 07:32 PM
  #25  
Kimmo
bike whisperer
 
Kimmo's Avatar
 
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 7,948

Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 384 Post(s)
Liked 17 Times in 14 Posts
Take out the front wheel, press the ends of the fork and the bars (much easier on road bikes, maybe rotate flat bars) against a window or glass door.

Never actually tried it, but I use a similar technique to make drop bar levers symmetrical.
Kimmo is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.