Need groupset recommendation
 

Trying to build a surly cross check steel frame with flat bars. Probably use it in the bad weather, when in the city and bike paths and trails.

Thinking of using sram x5 or deore shifters and derailleur. Any other recommendations? Want something easy to find since I'll have to order online and hopefully not to expensive.

Want a double crankset. The Shimano gxr 48/30 should work but expensive. Anything cheaper that's around that gearing?

Check into Microshift's offerings. I have found them to be of high quality and good value. https://www.microshift.com/en/

Would a tiagra 50/34 crank work with the alivio or deore shifters? Im guessing I would have to get road bike front derailleur and not sure about the shifting.

I'm basically looking at getting a deore or alivio groupset. Only issue is the large gear. The deore double crank maxes at 38 teeth and the alivio triple maxes out at 40 teeth (at least the ones I can find cheap). Not sure if thats enough for me.

MTB and road front derailleurs have different cable pull, so you have to match the shifter to the front derailleur. 9 speed Shimano MTB derailleurs will index correctly with 9 or 10 speed Shimano road shifters.

You're not going to find a cheaper double road/gravel crank with a 30t low for cheaper than $150. You could use a road triple (50/39/30, typically), or MTB triples are pretty common in 44/32/22.

Were it me for that kind of application I'd probably do a 1x setup with a 42t Sram Apex crankset and a 11-42 cassette. Can be reasonable with a cheaper Sunrace/Microshift 10 speed cassette, Microshift XLE derailleur, and Shimano Deore shifter. This might not have the gearing range you need, but it's worth thinking about.

It can pay to actually do the math on your gearing. I use https://www.sheldonbrown.com/gear-calc.html . For example, with a 38/28 crank wit an 11-34 cassette, you will be going 25 MPH pedaling at 90RPM, which is about what most road cyclists pedal but is a little higher than the average recreational cyclist. 33MPH at 120RPM, which is admittedly a pretty fast spin. Do you care about pedaling down hills or with tailwinds? If not, 38/11 could be plenty of high gear.

I’m really thinking hard about them for my next build.