Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

2015 Jamis Allegro Sport Crankset Replacement

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

2015 Jamis Allegro Sport Crankset Replacement

Old 08-06-20, 08:07 PM
  #1  
RORTEGA210
Newbie
Thread Starter
 
Join Date: Aug 2020
Location: San Antonio Tx
Posts: 3

Bikes: 2015 Jamis Allegro Sport

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
2015 Jamis Allegro Sport Crankset Replacement

Hello all, new here with my first of many noob questions.

I have a 2015 Jamis Allegro Sport with stripped drive side Crank Arm, going to take it to LBS to see if they can put in a heli coil for the time being but want to replace the crankset if it doesn't last long. Looking for help finding a replacement. Any help will be greatly appreciated. Thanks

Specs:
Cassette SRAM PG 820 8-Speed, 11-32T
Crankset Shimano FC-M171 triple, 48/38/28, 170 mm
BB Set FSA sealed cartridge, 68 x 110.5 mm (BB_UN26(-K)
Spindle Length D-NL (122.5 mm)
RORTEGA210 is offline  
Old 08-07-20, 04:31 AM
  #2  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 7,573

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1159 Post(s)
Liked 550 Times in 396 Posts
The Helicoil threads should be stronger than the original.
dsbrantjr is offline  
Old 08-07-20, 07:20 AM
  #3  
RORTEGA210
Newbie
Thread Starter
 
Join Date: Aug 2020
Location: San Antonio Tx
Posts: 3

Bikes: 2015 Jamis Allegro Sport

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
That's what I been told, now to find someone that will do it. Most bike shop are super busy right now.
RORTEGA210 is offline  
Old 08-07-20, 07:37 AM
  #4  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 7,573

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1159 Post(s)
Liked 550 Times in 396 Posts
Check with machine shops, the thread you want is 9/16" x 20 tpi, right-hand thread on the right pedal.
dsbrantjr is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.