Can someone confirm Shimano R7000 chainring bolt torque spec?
#1
Senior Member
Thread Starter
Can someone confirm Shimano R7000 chainring bolt torque spec?
Can someone confirm the Shimano R7000 chainring bolt torque spec for me? I知 replacing a front ring. I知 thinking it is something like 12-14NM. Also, is anti-seize required on the bolts, or will plain old Park Tool Grease Suffice? Thanks!
Likes For jimc101:
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
Anti seize is a good application for non moving assemblies, grease for moving parts. having said that grease is FAR better then nothing and fine in most cases.
The classic way to determine proper tightness is to ride the bike for a few miles and recheck the fastener. Of course if you have carbon ring bolts... Andy
The classic way to determine proper tightness is to ride the bike for a few miles and recheck the fastener. Of course if you have carbon ring bolts... Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Senior Member
Thread Starter
#5
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I apply Tef-Gel to only the male threads after cleaning the nuts/bolts and mating surfaces.