Bike tools
#1
Newbie
Thread Starter
Join Date: May 2021
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bike tools
Hello. I have a nishiki pueblo 26" mountain bike. I need to take off my cranks but I am unsure what crank puller I should buy. It looks so different from videos and photos I've seen.
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,941
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6167 Post(s)
Liked 4,784 Times
in
3,302 Posts
Do you know if the cranks are original to that bike? Otherwise if you bought this used, then they may have been changed.
You can go into your user profile and upload pic's of it to your gallery. Just let us know they are there.
Any model numbers or other stuff about the crank and bb you can tell or show with pics will help.
You can go into your user profile and upload pic's of it to your gallery. Just let us know they are there.
Any model numbers or other stuff about the crank and bb you can tell or show with pics will help.
#3
Newbie
Thread Starter
Join Date: May 2021
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Do you know if the cranks are original to that bike? Otherwise if you bought this used, then they may have been changed.
You can go into your user profile and upload pic's of it to your gallery. Just let us know they are there.
Any model numbers or other stuff about the crank and bb you can tell or show with pics will help.
You can go into your user profile and upload pic's of it to your gallery. Just let us know they are there.
Any model numbers or other stuff about the crank and bb you can tell or show with pics will help.
#4
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,941
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6167 Post(s)
Liked 4,784 Times
in
3,302 Posts
Well I thought it would show up there. If you can get to that pic, just write the URL of that pic in your next message. Remove the https:// and put spaces on both side of any dot it contains.
However if they are only eight year old cranks, they might be self extracting. If there is a hole in what you might think is just a cover, then you should see an allen socket in the bolt underneath. You just stick the allen key through the hole in the cover and unscrew the bolt. When it makes contact with the cover, it pushes the crankarm off the spindle.
However if they are only eight year old cranks, they might be self extracting. If there is a hole in what you might think is just a cover, then you should see an allen socket in the bolt underneath. You just stick the allen key through the hole in the cover and unscrew the bolt. When it makes contact with the cover, it pushes the crankarm off the spindle.
#6
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,452
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4328 Post(s)
Liked 3,949 Times
in
2,641 Posts
More than likely the bike is square taper but this tool will do both. Curious why you would need to take off your cranks though? You might bring it to the shop if you are unsure of what is going on.
#7
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,493
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2739 Post(s)
Liked 3,385 Times
in
2,048 Posts
Looks like the bolt is snapped off.
#8
Really Old Senior Member
This or similar-
I can't tell if the threads in the crank are damaged from the fuzzy pic.
https://www.parktool.com/product/uni...d-cranks-cwp-7
I can't tell if the threads in the crank are damaged from the fuzzy pic.
https://www.parktool.com/product/uni...d-cranks-cwp-7
#9
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,785
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1079 Post(s)
Liked 1,017 Times
in
719 Posts
Bolt didn't break, that looks like a BB with the threaded section extending out from the spindle and uses an axle nut, not a bolt. Still uses the same exact tool but more care has to be taken. I recommend removing the center of the crank pulling tool, install it and make sure it threads in all the way and then install the center of the tool. This style of course slips into the center of the tool and I've watched experienced mechanics strip out the crank thinking the tool was fully installed when really the center had bottomed out on the threaded section of the spindle.
Likes For Russ Roth:
#10
Senior Member
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
The crank puller is one of the cases where I am particularly conscious of a rule, which is: Make sure you can fully thread a fastener just by hand before applying a wrench. If it needs "persuasion" find out what's wrong with the threads before proceeding. Using a wrench to thread in a stubborn fastener, or in this case a crank tool, is a certain recipe for stripped threads.
#11
Senior Member
The crank puller is one of the cases where I am particularly conscious of a rule, which is: Make sure you can fully thread a fastener just by hand before applying a wrench. If it needs "persuasion" find out what's wrong with the threads before proceeding. Using a wrench to thread in a stubborn fastener, or in this case a crank tool, is a certain recipe for stripped threads.
Likes For cyrano138: