EBike Chainring Selection Help
#1
Full Member
Thread Starter
Join Date: Dec 2009
Posts: 392
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 81 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
EBike Chainring Selection Help
I own a 2022 Giant Fast Road EBike. I'd like to swap out the 'stock' chainring (42T) for a chainring with more teeth (say 52T or more). I'd prefer 1) SRAM or Shimano, a product tolerant of heavy/ all-weather commuting on rough roads, and 3) something doesn't require me to buy new crankarms. What model do you recommend?
Last edited by BROOKLINEBIKER; 09-12-22 at 07:59 PM.
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,003
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4171 Post(s)
Liked 3,791 Times
in
2,270 Posts
Do your homework well. With non E bikes this is usually fairly straightforward. Chain ring bolt circle diameter, number of bolts being first to match. But some E bikes use crank based sensors to control the E assist and I don't know if that will change with a ring that's nearly 25% larger.
I assume you're after a slower cadence for the same speed. Andy
I assume you're after a slower cadence for the same speed. Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,370
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 508 Post(s)
Liked 434 Times
in
331 Posts
1. Remove the crank so you can access the chainring bolt behind the crank.
2. Remove the chain guard so you can see how the ring interfaces with the crank spider.
3. Measure the bolt center diameter (BCD). That will be the centerline distance between two opposite bolts.
4. Go online and search for 1x chainrings having the 4-bolt pattern, BCD, and tooth count that you desire.
5. You might need a longer chain.
6. Put it all back together.
Or, learn to pedal faster. Seriously, reputable vendors of e-bikes choose their gearing carefully for the job at hand, and it's better for your legs.
2. Remove the chain guard so you can see how the ring interfaces with the crank spider.
3. Measure the bolt center diameter (BCD). That will be the centerline distance between two opposite bolts.
4. Go online and search for 1x chainrings having the 4-bolt pattern, BCD, and tooth count that you desire.
5. You might need a longer chain.
6. Put it all back together.
Or, learn to pedal faster. Seriously, reputable vendors of e-bikes choose their gearing carefully for the job at hand, and it's better for your legs.
Likes For oldbobcat:
#5
Full Member
Thread Starter
Join Date: Dec 2009
Posts: 392
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 81 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
Do your homework well. With non E bikes this is usually fairly straightforward. Chain ring bolt circle diameter, number of bolts being first to match. But some E bikes use crank based sensors to control the E assist and I don't know if that will change with a ring that's nearly 25% larger.
I assume you're after a slower cadence for the same speed. Andy
I assume you're after a slower cadence for the same speed. Andy
#6
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,278
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4252 Post(s)
Liked 3,864 Times
in
2,578 Posts
I would check with Giant and see if they have a max chainring or check with the motor manufacturer (Yamaha more than likely) and confirm with them aside from spacing issues what is the max chaining you could run on their system. Then go back to Giant and see what the max size you can fit on the bike and what the Bolt Circle Diameter is.
You could also consider using less assist instead of grinding in a tiny cog at the back in full power all the time consider using all of your gears and less power. A lot of people like to use their assist as the gearing and their gears as extra dead weight and that can really burn up the system and waste a lot of money replacing barely worn cassettes with single damaged cogs due to people not understanding the bike is a bike that also happens to be able to assist you but is a bike first and foremost.
If I am on a flat road or downhill I am not going to be in my highest setting generally because the motor is just going to give more power than I need and I will just spin real fast and not put much down.
You could also consider using less assist instead of grinding in a tiny cog at the back in full power all the time consider using all of your gears and less power. A lot of people like to use their assist as the gearing and their gears as extra dead weight and that can really burn up the system and waste a lot of money replacing barely worn cassettes with single damaged cogs due to people not understanding the bike is a bike that also happens to be able to assist you but is a bike first and foremost.
If I am on a flat road or downhill I am not going to be in my highest setting generally because the motor is just going to give more power than I need and I will just spin real fast and not put much down.