Lost my noodle
#1
Junior Member
Thread Starter
Lost my noodle
Rather, lost track. I took these apart to do some de-rusting and didn't pay attention to which of these went on the front and rear. Giant brand step through if it makes any difference. Thanks!

#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 17,123
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3790 Post(s)
Liked 2,938 Times
in
1,799 Posts
Most likely the noodle with the longer top casing fitting is the front. That longer black part often has a spring loaded casing seat, to reduce the brake's initial grab.
Try setting up the rear first with the shorter noodle and if that goes well then use the longer one up front. Andy
Try setting up the rear first with the shorter noodle and if that goes well then use the longer one up front. Andy
__________________
AndrewRStewart
AndrewRStewart
#3
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 2,726
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 728 Post(s)
Liked 1,085 Times
in
641 Posts
My noodle seems to be disappearing at an accelerated rate.
#4
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 3,924
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 284 Times
in
215 Posts
Generally, the one with the acute angle is for the rear. But it's not a big deal,. You can bend these a little bit.
#5
:D
Join Date: Oct 2013
Location: Mich
Posts: 6,157
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,177 Times
in
1,457 Posts
left to the rear.
__________________
-Oh Hey!
-Oh Hey!
#6
Senior Member
Likes For Hondo6:
#7
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 36,931
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 132 Post(s)
Tagged: 1 Thread(s)
Quoted: 4884 Post(s)
Liked 925 Times
in
555 Posts
Depending on frame size, you may need to use the shorter noodle on the rear.
The front has no constraint since the cable is free all the way to the handlebar.
However, there's much less room between the rear brake and the top tube, so you have to accommodate that.
The front has no constraint since the cable is free all the way to the handlebar.
However, there's much less room between the rear brake and the top tube, so you have to accommodate that.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
“Never argue with an idiot. He will only bring you down to his level and beat you with experience.”, George Carlin
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
“Never argue with an idiot. He will only bring you down to his level and beat you with experience.”, George Carlin
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.