What OD is my seatpost?
I just put the calipers to my Easton aluminum-frame seat post (measuring for a front derailleur). I measure 1.28" (!). I've heard of one-and-a-quarter and one-and-three-eights size seatposts, but this seems to be a funny size. Will a one-and-three-eights derailleur clamp fit? Will I need a shim? Thanks!
|
Originally Posted by FarHorizon
I just put the calipers to my Easton aluminum-frame seat post (measuring for a front derailleur). I measure 1.28" (!). I've heard of one-and-a-quarter and one-and-three-eights size seatposts, but this seems to be a funny size. Will a one-and-three-eights derailleur clamp fit? Will I need a shim? Thanks!
|
Originally Posted by sydney
Word on the street,is that you measure seattube diameter to get derailer clamp diameter. ;)
|
Originally Posted by sydney
Word on the street,is that you measure seattube diameter to get derailer clamp diameter. ;)
Sydney is, of course, correct. You need to measure the seat tube, not the seat post. If your seat POST measures 1.28", then chances are your seat TUBE measures 1.375", since that's the only common size which is LARGER than 1.28"... but you oughta measure it yourself to be sure. |
Originally Posted by moxfyre
Sydney is, of course, correct. You need to measure the seat tube, not the seat post..
|
Originally Posted by FarHorizon
Sydney's usually correct - My original post was wrong. I measured the seat TUBE OD, not the seat post as originally stated. The OD of the tube is 1.28". That's why I posted in the first place. My bad. So, let's try it again - is 1.28" any kind of common seat post diameter?
Seat POST diameters are usually done in metric, so 1.28" is 32.512 mm. That's pretty big, I haven't seen a seat post bigger than 32 mm, but I'll bet sydney has :p You may want to check out Sheldon Brown's seatpost database: http://sheldonbrown.com/seatpost-sizes.html |
Apologies to all: I've bolluxed up this thread from the start - I'm brain-dead this evening, obviously..
The seat tube measures 32mm OD (1.25"). I need a 32mm or 1.25" derailleur clamp. This wasn't difficult at all - I just made it that way. Excuse the brain fart :o |
Originally Posted by moxfyre
Okay, I'm confused by this post again :) You actually measured your seat TUBE to be 1.28", and now you're asking if that SAME MEASUREMENT is a common seat POST size?
http://sheldonbrown.com/seatpost-sizes.html |
All times are GMT -6. The time now is 01:07 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.