Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Do I Have the Right Rear Derailleur?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Do I Have the Right Rear Derailleur?

Old 04-19-24, 02:37 PM
  #26  
Full Member
 
Join Date: Sep 2015
Posts: 290
Liked 53 Times in 38 Posts
Originally Posted by smd4
Does that second, incorrect protrusion/stop on the RD do anything except confuse people?
I didn't notice or have second thoughts when I had to replace my DA 9100 with an Ultegra R8000 after a minivan rear-ended me. It just fit and looked right. Different hanger? Now I need to dig up my R8000 to see if my version had it (replaced it with Sensah Empire Pro and set aside the bike for trainer duty).
kcjc is offline  
Old 04-19-24, 02:46 PM
  #27  
Senior Member
 
soyabean's Avatar
 
Join Date: Feb 2022
Location: GMT-5
Posts: 988
Liked 434 Times in 287 Posts
The OP was the one that f'ed up by installing it wrong.

Members here can't see the bike, all we can do is guess at best to bad photos.

If they don't like the suggestions that might fix their f-up, they can just bring their bike to a LBS, which is encouraged and not bad advice.

Do you know how many smart folks ask for advice on the internet on why their car won't start, when all they needed was to put GAS in it? It's not up to forum members to figure that out for them.
soyabean is offline  
Old 04-19-24, 02:47 PM
  #28  
Full Member
 
Join Date: Sep 2015
Posts: 290
Liked 53 Times in 38 Posts
👍 Should have checked first. My last cassette purchases were of the 5800 & 6800 vintage back in 2018.
kcjc is offline  
Old 04-19-24, 03:52 PM
  #29  
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,114

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Liked 2,942 Times in 1,630 Posts
Originally Posted by Atlas Shrugged
The number of ridiculous responses from people who have no clue but weigh in regardless was amazing. Great you were able to fix it as well as filter out the garbage.
It's easy to criticize other people's suggestions from the safe position of having offered nothing at all.

I don't speak for others, but I'll consider the source before taking it to heart.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Likes For FBinNY:
Old 04-19-24, 04:26 PM
  #30  
Senior Member
 
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,752
Liked 1,122 Times in 775 Posts
I've learned to always read the setup instructions for any new groupset I encounter. Things have changed quite a bit since even 10 years ago when mounting F & R derailleurs was mostly the same procedure with only a couple little idiosyncrasies as compared to now with something like the OP's mounting issue. All mfrs publish instructions that can be easily found on the net if not included with the component. Even mounting the shifter cable on the wrong side of the clamp bolt is still a pretty common mistake so check out the instructions first.
Crankycrank is offline  
Old 04-19-24, 04:37 PM
  #31  
Senior Member
 
soyabean's Avatar
 
Join Date: Feb 2022
Location: GMT-5
Posts: 988
Liked 434 Times in 287 Posts
I've learned to always NOT to install a RD incorrectly, then blame everyone else for being clueless.
soyabean is offline  
Old 04-19-24, 04:51 PM
  #32  
Senior Member
 
Kontact's Avatar
 
Join Date: Apr 2011
Posts: 7,460
Liked 1,807 Times in 1,175 Posts
Originally Posted by soyabean
The OP was the one that f'ed up by installing it wrong.

Members here can't see the bike, all we can do is guess at best to bad photos.

If they don't like the suggestions that might fix their f-up, they can just bring their bike to a LBS, which is encouraged and not bad advice.

Do you know how many smart folks ask for advice on the internet on why their car won't start, when all they needed was to put GAS in it? It's not up to forum members to figure that out for them.
The photos showed perfectly that the derailleur was not mounted correctly. The problem was all the respondents offering an opinion about a derailleur GENERATION that they apparently know nothing about.

Which is pretty damn typical.
Kontact is offline  
Likes For Kontact:
Old 04-19-24, 05:18 PM
  #33  
Senior Member
 
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,050

Bikes: 1989 Cinelli Supercorsa

Liked 3,105 Times in 1,873 Posts
Thing looks like it has at least one too many pivots and a superfluous lug, so yeah, I wouldn’t know where to start!
smd4 is offline  
Old 04-19-24, 07:58 PM
  #34  
Senior Member
 
Join Date: Sep 2021
Location: SW Florida, USA
Posts: 1,350

Bikes: Yes

Liked 723 Times in 490 Posts
Originally Posted by soyabean
Do you know how many smart folks ask for advice on the internet on why their car won't start, when all they needed was to put GAS in it?
I'd guess it's proportionally about the same number, percentage-wise, as the number who claim that a too-large rear sprocket is the problem without bothering to check the RD's published specifications.

https://bike.shimano.com/en-EU/produ...-R8000-SS.html
Hondo6 is offline  
Likes For Hondo6:
Old 04-19-24, 09:47 PM
  #35  
Senior Member
 
Kontact's Avatar
 
Join Date: Apr 2011
Posts: 7,460
Liked 1,807 Times in 1,175 Posts
Originally Posted by soyabean
The 11-30 is messing it up with a chain too long because that is expecting a 1x up there.

You'd be able to remove one link with a smaller 11-28T, thus taughting the chain when it's on the 11T.

There exists aftermarket bolt-on dropouts that let's you place a RD even lower.
Where did you get this from?
Kontact is offline  
Old 04-20-24, 05:58 AM
  #36  
Senior Member
 
bboy314's Avatar
 
Join Date: Dec 2008
Location: Pioneer Valley
Posts: 1,361
Liked 1,061 Times in 538 Posts
Originally Posted by soyabean
The 11-30 is messing it up with a chain too long because that is expecting a 1x up there.

You'd be able to remove one link with a smaller 11-28T, thus taughting the chain when it's on the 11T.

There exists aftermarket bolt-on dropouts that let's you place a RD even lower.
In addition to the first sentence being incorrect, a hanger extender (assuming that’s what is meant by “aftermarket bolt-on dropout) will not change the chain wrap capacity of the derailleur.
bboy314 is offline  
Likes For bboy314:
Old 04-20-24, 04:00 PM
  #37  
Full Member
Thread Starter
 
Join Date: Apr 2009
Location: Connecticut
Posts: 224

Bikes: Roubaix and StumpJumper

Liked 6 Times in 4 Posts
Originally Posted by soyabean
I've learned to always NOT to install a RD incorrectly, then blame everyone else for being clueless.
who did i blame...?

I've rebuilt this bike 3 or 4 times with new components - this last time i screwed up something I didn't know it was possible to screw up.

as i said - i thought when i put t on that it looked odd, but I didn't see the mistake.

so the lesson is that if you think something looks weird and can't figure out why.., keep looking.
jgf310 is offline  
Likes For jgf310:
Old 04-20-24, 04:06 PM
  #38  
Senior Member
 
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,759

Bikes: Too many bikes, too little time to ride

Liked 493 Times in 339 Posts
Glad it got worked out. The only thing I would have contributed was that I've ran 32t cassettes with short cage derailleurs so that couldn't have been the problem.
tFUnK is offline  
Likes For tFUnK:
Old 04-22-24, 01:14 AM
  #39  
Over the hill
 
urbanknight's Avatar
 
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,418

Bikes: Giant Defy, Giant Revolt

Liked 1,259 Times in 714 Posts
Originally Posted by jgf310
who did i blame...?
I can't figure that out either! You were nothing short of respectful to all of us, right or wrong.

And good eye from KCT1986 !
__________________
It's like riding a bicycle
urbanknight is offline  
Old 04-22-24, 06:08 AM
  #40  
Senior Member
 
50PlusCycling's Avatar
 
Join Date: Mar 2018
Posts: 1,189
Liked 891 Times in 443 Posts
Everyone who has installed their own parts has had issues of some kind or other. I’ve done a number of boneheaded things in my time, and, according to my wife, will probably do many more.
50PlusCycling is online now  
Old 04-22-24, 06:28 AM
  #41  
Senior Member
 
Trakhak's Avatar
 
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,696
Liked 3,232 Times in 1,846 Posts
Originally Posted by jgf310
who did i blame...?

I've rebuilt this bike 3 or 4 times with new components - this last time i screwed up something I didn't know it was possible to screw up.

as i said - i thought when i put t on that it looked odd, but I didn't see the mistake.

so the lesson is that if you think something looks weird and can't figure out why.., keep looking.
You weren't accused of blaming anyone - the remark you responded to was part of the bickering side-conversation.
Trakhak is offline  
Old 04-22-24, 06:47 AM
  #42  
Junior Member
 
razorjack's Avatar
 
Join Date: May 2018
Posts: 110

Bikes: Trans Sentinel, Spesh Tarmac

Liked 15 Times in 10 Posts
Originally Posted by soyabean
11-30T is practically a mtb cassette.
It's a normal road cassette, the same as Ultegra 11-32, and on 12s 11-34 ....
105/Ultegra rear mech with medium cage works well with 11-32 cassette as well, just avoid maximum cross chain (Di2 will block it for you - small/small - so no full slack situation and risk of dropped chain, however big/big is allowed (as an emergency I guess, or if you miss gears) )

(MTBs cassettes are from 42 up now )

Last edited by razorjack; 04-24-24 at 05:24 AM.
razorjack is offline  
Old 04-22-24, 12:19 PM
  #43  
Over the hill
 
urbanknight's Avatar
 
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,418

Bikes: Giant Defy, Giant Revolt

Liked 1,259 Times in 714 Posts
Originally Posted by Trakhak
You weren't accused of blaming anyone - the remark you responded to was part of the bickering side-conversation.
The wording made it seem like it was against the OP.

Originally Posted by soyabean
The OP was the one that f'ed up by installing it wrong... If they don't like the suggestions that might fix their f-up, they can just bring their bike to a LBS, which is encouraged and not bad advice.

Do you know how many smart folks ask for advice on the internet on why their car won't start, when all they needed was to put GAS in it? It's not up to forum members to figure that out for them.
Originally Posted by soyabean
I've learned to always NOT to install a RD incorrectly, then blame everyone else for being clueless.
__________________
It's like riding a bicycle
urbanknight is offline  
Old 04-22-24, 12:38 PM
  #44  
ignominious poltroon
 
Polaris OBark's Avatar
 
Join Date: Jan 2022
Posts: 4,221
Liked 3,550 Times in 1,872 Posts
Originally Posted by jgf310
the cage is still pretty horizontal in big/big, which causes resistance
I've gotten that derailleur to tolerate an 11-36T cassette, with the B-screw screwed in almost all the way.

The Big-Big chainring combination is best avoided. Ideally, you want to be able to shift into it so that if you do it by accident, it won't rip your drivetrain apart.

My wife seems to have a perverse need to ride in that combo. But normal people don't need to, since the gear ratio can be replicated elsewhere.

Hers is a Di2 system. Interestingly, it doesn't prevent the big/big combo by default, but it does prevent the user from shifting into the small/small combo, presumably to avoid slack.

Here is the best way to size the chain: https://bettershifting.com/installat...and-direction/
Polaris OBark is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.