"Rilled" BB bearings
02-24-06, 10:53 AM
#1
"Light is right"
Thread Starter
Join Date: Dec 2005
Location: Henderson/Las Vegas, NV
Posts: 168
Bikes: 06 Cannondale Synapse, 93 Bridgestone XO-1 (commuter), 90 Specialized Sirrus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
"Rilled" BB bearings
I noticed a "clunk" while pedaling in the BB of my Cannondale Synapse and the small chain ring on the front never really worked right. The bike had about 900 miles on it.
UPDATE:
The LBS said that the BB bearings where "rilled" and were replaced free of charge on manufacturers warranty..... I also replaced the chain.
BUT after 70 miles I am noticing the SAME THING again and getting some bad front derailleur/chain rub in many gears including near the middle of the rear cog set??? (eg. 50/19)
What’s the deal?
UPDATE:
The LBS said that the BB bearings where "rilled" and were replaced free of charge on manufacturers warranty..... I also replaced the chain.
BUT after 70 miles I am noticing the SAME THING again and getting some bad front derailleur/chain rub in many gears including near the middle of the rear cog set??? (eg. 50/19)
What’s the deal?
