Changing forks affects handling?
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Posts: 64
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Changing forks affects handling?
I just started putting together a Surly Steamroller fixie for riding on the trails and have been thinking of upgrading the road fork for a Surly 'cross model. However, I have heard that the 'cross fork will raise the head tube 12mm as it's configured a bit longer than the road fork (it's really configured for an entirely different frame.)
Anyway, what would raising the head tube 12mm really do to the handling of the bike? As I'm pulling together pieces to make this bike road-ready I'm finding myself more and more theorizing about equipment combinations without any real empirical evidence. It's a dangerous racket.
Thanks in advance,
Anyway, what would raising the head tube 12mm really do to the handling of the bike? As I'm pulling together pieces to make this bike road-ready I'm finding myself more and more theorizing about equipment combinations without any real empirical evidence. It's a dangerous racket.
Thanks in advance,
#3
Banned
Join Date: Aug 2001
Location: upstate New York
Posts: 1,688
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Why don't you ask Surly
__________________
Je vais à vélo, donc je suis!
Je vais à vélo, donc je suis!
#4
Member
Join Date: Sep 2002
Location: Reston, VA
Posts: 51
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Brian_T
Since you’ve asked, “What would raising the head tube 12mm really do to the handling of the bike?” Try to understand the function of the fork in steering. The steering axis is a line through the head tube, the term “rake” is used to quantify the amount of distance the front wheel axial is set forward from the steering axis. Generally it is thought the more rake, the slower the response however the more “stable” the ride. On the other side of the geometry, the EZ rider chopper motorcycles are an extreme in steering angle; nice traveling in a straight line, but tight cornering wasn’t their forte.
I’m certain other forum members will enlighten you on additional aspects to be considered. Pokey directed you to the frame vendor, a wise consideration since raising the head tube may change the steering axis angle and in theory may affect the rake for a given fork. Be advised that with any “cycle” changing steering geometry can cause some very strange things to begin to happen at high speed, trust me on this!
Cheers; and God Bless
Since you’ve asked, “What would raising the head tube 12mm really do to the handling of the bike?” Try to understand the function of the fork in steering. The steering axis is a line through the head tube, the term “rake” is used to quantify the amount of distance the front wheel axial is set forward from the steering axis. Generally it is thought the more rake, the slower the response however the more “stable” the ride. On the other side of the geometry, the EZ rider chopper motorcycles are an extreme in steering angle; nice traveling in a straight line, but tight cornering wasn’t their forte.
I’m certain other forum members will enlighten you on additional aspects to be considered. Pokey directed you to the frame vendor, a wise consideration since raising the head tube may change the steering axis angle and in theory may affect the rake for a given fork. Be advised that with any “cycle” changing steering geometry can cause some very strange things to begin to happen at high speed, trust me on this!
Cheers; and God Bless