Deus/Atlas X-Type as double?
#1
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Brooklyn
Posts: 78
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Deus/Atlas X-Type as double?
I've read the instructions and raceface say its possible, but has anyone ever tried either of these external bearing cranks as a double chainring setup? Apparently, all that is necessary is a removal of the chainline spacers and inner chainring. . . in theory it should work. . . has anyone done it? and if so, could you give pictures? thanx. . .
#2
Camaro driver
Join Date: Jan 2005
Posts: 42
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It will work fine in with a double setup. I didn't use either of the spacers on the drive side in order to get the best chainline, though instructions called for both of them. This was not a problem as far as installing the crank was concerned. My chainline is pretty terrible in the small ring, but optimal in middle and big rings, so I expect my setup is probably what you'd shoot for with a double.