Brake Adjustment
#1
Member
Thread Starter
Join Date: Mar 2006
Location: Calgary, AB
Posts: 44
Bikes: Cervelo P2SL, Motobecane fixed conversion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Brake Adjustment
For some reason it seems like my rear brake is 'sticking'. When I pull on the brake lever (dia-comp) the brake pads come to the rim and the bike stops. But when I let go of the lever the pads barley come off the rim and the lever doesn't 'spring' back into position. The lever also seems to have a bit of play to it.
Any suggestions???
Thanks!
Any suggestions???
Thanks!
#2
Member
Thread Starter
Join Date: Mar 2006
Location: Calgary, AB
Posts: 44
Bikes: Cervelo P2SL, Motobecane fixed conversion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Also! When the cable is off the brake it doesn't seem like the brake readily springs back open, it seems like it needs a bit of a nudge...
#3
Senior Member
Join Date: Feb 2006
Location: Kent, OH
Posts: 79
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I had a sticky brake. When I took them apart I found corrosion around the pivots. They are 5 year old Shimano 105s (?). I don't know what the previous owner did to them, but once I cleaned them all up they worked great.