wheel balancing?
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Rhode Island
Posts: 293
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
wheel balancing?
I just got a new pair of Campy Zondas. Somewhere it said something about balancing the wheels. They seem to be trued. I have mounted the tubes and tires. However when I spin the wheel it feels lopsided, i.e. out of balance, as if someone had placed a weight on one side. What exactly is this? Do I need to be concerned? Is this something I can learn how to dial-in myself?
#2
Senior Member
Join Date: Jun 2002
Posts: 1,372
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally posted by flyefisher
I just got a new pair of Campy Zondas. Somewhere it said something about balancing the wheels. They seem to be trued. I have mounted the tubes and tires. However when I spin the wheel it feels lopsided, i.e. out of balance, as if someone had placed a weight on one side. What exactly is this? Do I need to be concerned? Is this something I can learn how to dial-in myself?
I just got a new pair of Campy Zondas. Somewhere it said something about balancing the wheels. They seem to be trued. I have mounted the tubes and tires. However when I spin the wheel it feels lopsided, i.e. out of balance, as if someone had placed a weight on one side. What exactly is this? Do I need to be concerned? Is this something I can learn how to dial-in myself?
#3
Ride Nekkid!
Join Date: May 2002
Location: Trollsville, USA
Posts: 752
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bicvcle wheels are trued and dished, but not balanced. My boyfriend Pokey is a little gruff, but right. If you have good hubs, the weight of the valve stem will make a heavy spot on the wheel. It won't affect performance though!
__________________
So many men....so little time!
So many men....so little time!
#4
Just ride.
On my Open Pros and other Mavic rims, the heavy spot is actually opposite the stem... I assume the rim was welded there. Don't know about other brands.
When the bike is suspended, rotate the heavy side to 3 or 9 o'clock. (For a rear wheel, you have to take the chain off the cassette, or just take the wheel off and hold the axle in your hands). How fast does the heavy side fall to 6 o'clock? If the bearings are in good shape and adjusted right, it's perfectly normally for it to slowly rotate down, and oscillate a few times like a pendulum. If the heavy side drops fast, then it is unusually heavy.
When the bike is suspended, rotate the heavy side to 3 or 9 o'clock. (For a rear wheel, you have to take the chain off the cassette, or just take the wheel off and hold the axle in your hands). How fast does the heavy side fall to 6 o'clock? If the bearings are in good shape and adjusted right, it's perfectly normally for it to slowly rotate down, and oscillate a few times like a pendulum. If the heavy side drops fast, then it is unusually heavy.
#5
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Rhode Island
Posts: 293
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
OK, cool. The only reason I asked was because my mavic open 4 CDS on my other bike spin without any such imbalance. I guess I'll have to try your test and then finally ride them and see if there is anything funny about that. Can't wait to ride my new bike - Klein Quantum with new campy chorus and the Zondas. I'm waiting on a funny-sized seatpost and then it's off to the roads! Thanks all for the advice.
#6
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Rhode Island
Posts: 293
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I checked it last night and it's actually opposite the valve stem where the extra weight is. Perhaps I will add some of those screw tighteners to the valve stem to balance it out. Too bad weighted ones are not made.