changing chainring possibilty??
#1
Junior Member
Thread Starter
Join Date: Aug 2005
Location: Calgary, Alberta
Posts: 124
Bikes: Cannondale T-800, Bridgestone RB-1, Bianche Mountain Bike
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
changing chainring possibilty??
I have a 2001 Cannondale T800 touring bike with a 9-speed rear sprocket (11-34) and a Cannondale Performance chainring (30/42/52). Now that I have hit my 60s and have more time to tour but legs that aren't what they used to be, I'm thinking about getting a smaller combination on the chainring. I barely use the largest ring, and on many long climbs with a load, I often wish I had some lower gears to drop down to. I just replaced my chain and sprocket this spring (simple wear). Is it possible to have a smaller chainring combo installed without changing everything else on the drive train? Thanks rcd
#2
Senior Member
Join Date: Feb 2005
Location: Oklahoma
Posts: 9,438
Bikes: Trek 5500, Colnago C-50
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
It is possible but the results aren't always 100% satisfactory. The TA Specialties Alize chainrings are designed to work with Shimano triple cranksets. You could replace your rings with 50-39-28 but shifting performance may not be quite as good as what you now have. You should also consider a complete crankset replacement from TA or FSA. Also the Shimano 105 10-speed crankset has 50-39-30 chainrings. It may work OK with a 9-speed drivetrain.
With some research you may be able to find a touring specific front derailleur designed for smaller chainrings. A mountain style FD won't work.
The front derailleur will need to be lowered to work with smaller chainrings. If your front derailleur is a braze-on type, the more common type now, it probably won't go low enough for a big ring smaller than a 50. That won't be a problem if you have a clamp-on FD.
Try shopping for TA Alize rings at https://www.peterwhitecycles.com and https://sheldonbrown.com.
Al
With some research you may be able to find a touring specific front derailleur designed for smaller chainrings. A mountain style FD won't work.
The front derailleur will need to be lowered to work with smaller chainrings. If your front derailleur is a braze-on type, the more common type now, it probably won't go low enough for a big ring smaller than a 50. That won't be a problem if you have a clamp-on FD.
Try shopping for TA Alize rings at https://www.peterwhitecycles.com and https://sheldonbrown.com.
Al
#3
Senior Member
Join Date: Jul 2005
Posts: 7,487
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 162 Times
in
89 Posts
Originally Posted by rcd
I have a 2001 Cannondale T800 touring bike with a 9-speed rear sprocket (11-34) and a Cannondale Performance chainring (30/42/52). Now that I have hit my 60s and have more time to tour but legs that aren't what they used to be, I'm thinking about getting a smaller combination on the chainring. I barely use the largest ring, and on many long climbs with a load, I often wish I had some lower gears to drop down to. I just replaced my chain and sprocket this spring (simple wear). Is it possible to have a smaller chainring combo installed without changing everything else on the drive train? Thanks rcd
https://sheldonbrown.com/harris/cranks/11074.html
Personally, I've had excellent luck with Nashbar's Touring/Trekking crankset, also 110/74 BCD.
https://www.nashbar.com/profile.cfm?c...0Road%20Cranks
I've switched the chainrings out to 46/36/24 on mine, from the stock 48/38/28. They've got these cranks on sale right now, too, and the Nashbar branded ISIS bottom bracket that fits them is around $23. Durability with ISIS bb's is a hit-and-miss kind of thing, but so far I've had excellent luck with the inexpensive Nashbar ISIS bb. FWIW, I'm running an 11 x 32 nine speed cassette, with nine speed bar end shifters. I use a Shimano XT rear derailleur on the bike, and a Shimano 105 on the front.
As Al1943 said, you'd need to lower the front derailleur on the seat tube to accomodate the smaller big ring. Your front derailleur will probably not be shaped just right for the smaller sized big ring, but it shouldn't make any noticeable difference. I used a dremel tool to reshape my 105 front derailleur, so that it better matches the shape of the 46t big ring I'm using-
Last edited by well biked; 07-02-07 at 09:32 AM.
#4
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
The cheapest change would be to substitute a 26T ring for the stock 30T granny ring. This is a simple way to get a significantly lower low gear and doesn't require any other changes.
#5
Junior Member
Thread Starter
Join Date: Aug 2005
Location: Calgary, Alberta
Posts: 124
Bikes: Cannondale T-800, Bridgestone RB-1, Bianche Mountain Bike
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Thanks all. Whatever course I take, it certainly sounds like there's a way to get up those hills! rcd
#6
Bottecchia fan
Join Date: Aug 2003
Location: Colorado Springs, CO
Posts: 3,520
Bikes: 1959 Bottecchia Milano-Sanremo (frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame), 1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame), 1974 Peugeot UO-8
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
Originally Posted by HillRider
The cheapest change would be to substitute a 26T ring for the stock 30T granny ring. This is a simple way to get a significantly lower low gear and doesn't require any other changes.
#7
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
Originally Posted by Kommisar89
. Might want to add one of those little chain watcher gadgets to insure the chain doesn't come off on the shift to the granny ring.