Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Hints and tricks thread

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Hints and tricks thread

Old 06-21-18, 08:36 PM
  #626  
Clark W. Griswold
 
Join Date: Mar 2014
Location: ,location, location
Posts: 13,274

Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4251 Post(s)
Liked 3,862 Times in 2,578 Posts
That crimp pattern looks rather nice. If I don't have a crimper around I will just press it but that certainly looks a lot more trick and with some skills and patience or maybe a CNC machine you could probably come up with some different patterns!
veganbikes is offline  
Old 06-21-18, 09:42 PM
  #627  
BF's Resident Dumbass
 
sjanzeir's Avatar
 
Join Date: Apr 2016
Location: Jeddah, Saudi Arabia
Posts: 1,566

Bikes: 1990 Raleigh Flyer (size 21"); 2014 Trek 7.6 FX (size 15"); 2014 Trek 7.6 FX (size 17.5"); 2019 Dahon Mu D9; 2020 Dahon Hemingway D9

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 1,493 Times in 496 Posts
Originally Posted by ElijahCooper
sjanzeir Your post 622 - It turned out well, but it seems to me that now it will not be so convenient to get a bottle, because now it hangs very low, don't you think so?
The bike - aforementioned hack included - is gone now, so it doesn't matter anymore. To answer your question, though, the bottle actually sat higher than it would on my Speed or Mu (both of which thankfully have bottle cage bosses from the factory; no such shenanigans required.) It sat higher than it would on a typical diamond frame such as my 7.6, with the added convenience of not having to fiddle my way around a top tube reaching down for it.

Last edited by sjanzeir; 06-21-18 at 09:46 PM.
sjanzeir is offline  
Old 06-27-18, 03:12 AM
  #628  
bike whisperer
 
Kimmo's Avatar
 
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,533

Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1520 Post(s)
Liked 716 Times in 508 Posts
Originally Posted by SylvainG
Hold post but currently going through some of them. Found this on Google, adjustable cone wrench

Bicycle Cone Wrench

Do it with one of these for the win:

Kimmo is offline  
Old 07-01-18, 05:03 PM
  #629  
Junior Member
 
hrdknox1's Avatar
 
Join Date: Apr 2014
Posts: 184
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 53 Times in 40 Posts
Using a vacuum to get spoke nipples out after they've fallen inside your rim

When spoke nipples fall inside a rim they are a nuisance to get out. What I find that works best to get them out is a vacuum. If you don't have a Shop-Vac or equivalent you will need to create a better vacuum inside the rim.

To create a better vacuum, first have all the nipples attached to the spokes and tightened, then cover the valve hole on the inner side of the rim with tape. ​​Second, use a rim strip or something non-adhesive to cover the spoke holes on the outer side of the rim leaving the valve hole open (there is no need to do this with a Shop-Vac). Next, position the rim so the valve hole is at the bottom and shake the rim to move the nipples near the valve hole. Finally, place the vacuum over the valve hole and suck the nipples out.

I use a Shop-Vac because it has tremendous suction, but most household vacuum cleaners will work if you create a better vacuum inside the rim. Be sure to empty your vacuum cleaner before use to make it easier to find the nipples.

Last edited by hrdknox1; 07-01-18 at 06:46 PM.
hrdknox1 is offline  
Old 07-01-18, 08:38 PM
  #630  
Junior Member
 
hrdknox1's Avatar
 
Join Date: Apr 2014
Posts: 184
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 53 Times in 40 Posts
Rear wheel quick release

To remove the rear wheel you do not have to unscrew the quick release. The rear drop outs do not have notches, and you can remove the wheel just by releasing the skewer.
hrdknox1 is offline  
Old 07-02-18, 09:47 AM
  #631  
Keepin it Wheel
 
RubeRad's Avatar
 
Join Date: Aug 2011
Location: San Diego
Posts: 10,238

Bikes: Surly CrossCheck, Krampus

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,399 Times in 2,510 Posts
Yeah, that's why they call it a quick release. In fact, many people (including my self) file off the 'lawer lips' on their front forks, so that quick release is also actually quick.
RubeRad is offline  
Likes For RubeRad:
Old 07-10-18, 11:42 PM
  #632  
bike whisperer
 
Kimmo's Avatar
 
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,533

Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1520 Post(s)
Liked 716 Times in 508 Posts
Originally Posted by RubeRad
Yeah, that's why they call it a quick release. In fact, many people (including my self) file off the 'lawer lips' on their front forks, so that quick release is also actually quick.
Damn straight. Death to lawyer tabs!
Kimmo is offline  
Likes For Kimmo:
Old 07-17-18, 11:31 AM
  #633  
Senior Member
 
Join Date: May 2016
Location: Toronto, Ontario
Posts: 70

Bikes: 1993 Pinarello Vuelta Retroroadie / 1974 Raleigh Sprite

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
To save yourself from having to clean the vaccuum cleaner first, use cheesecloth or grab a pair of pantyhoses from the dollarstore and put it over the vacuum tube held on by an elastic
novalyx is offline  
Old 08-12-18, 05:05 PM
  #634  
BF's Resident Dumbass
 
sjanzeir's Avatar
 
Join Date: Apr 2016
Location: Jeddah, Saudi Arabia
Posts: 1,566

Bikes: 1990 Raleigh Flyer (size 21"); 2014 Trek 7.6 FX (size 15"); 2014 Trek 7.6 FX (size 17.5"); 2019 Dahon Mu D9; 2020 Dahon Hemingway D9

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 1,493 Times in 496 Posts
My 7.6FX's factory-installed Wellgo bear trap pedals didn't come with toe clips and straps. When I bought the bike, I picked up with it these VP pedals with straps built in:



Problem is, even with the straps and toe clips, they were crap for holding my feet straight. The originals, on the other hand, are great for keeping my feet in place, but not all that great on the upstroke.

Thing is, being broke and all, I couldn't spend money I haven't got to order straps online, nor were aftermarket toe clips available for me to buy at any of the local shops. I had a second pair of the same VP pedals lying around in a drawer, the spindle of one of which was bent and wobbly, so I decided to see if I could cannibalize them for the toe clips and find a way to bolt them to the Wellgos somehow. It turned out well enough.

I started with unscrewing the toe clips from the VPs:



Then pried out the reflector at the base of the toe clip:



Now, there were three nuts molded into the resin of the toe clip, so I had to cut these out so as to use two of them later to bolt the toe clip to the cage of the Wellgo (see next post):





Now on to cutting off all the excess resin:



(Continued below.)

Last edited by sjanzeir; 08-16-18 at 01:56 PM.
sjanzeir is offline  
Old 08-12-18, 05:06 PM
  #635  
BF's Resident Dumbass
 
sjanzeir's Avatar
 
Join Date: Apr 2016
Location: Jeddah, Saudi Arabia
Posts: 1,566

Bikes: 1990 Raleigh Flyer (size 21"); 2014 Trek 7.6 FX (size 15"); 2014 Trek 7.6 FX (size 17.5"); 2019 Dahon Mu D9; 2020 Dahon Hemingway D9

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 1,493 Times in 496 Posts
(Continued)

Making the necessary measurements and drilling the requisite holes (by hand; no need to hook up a power drill, as the resin material is soft enough):





The base is 58.5mm wide. The screw holes on the Wellgo pedal where the the toe clip will sit (in place of the original reflector) are exactly one inch/25.4mm apart. I measured 16.5mm from each side in and 4mm down from the thick part of the base (the screw head is 8mm in diameter) and marked out where to drill.

Now, prying the reflector off of the front side of the Wellgo (the hole where the strap goes into the body of the pedal, and the corresponding "tongue" in the cage, indicate the back side of the pedal):



Now, screwing the toe clip to the same holes where the reflector used to fit, using the same bolts that used to hold the toe clip to its original VP body (and the same nuts seen earlier):





I even managed to push the reflector back into its holder without breaking it!



And voila! Two bear trap pedals with toe clips and straps!



Now, I have no idea if or for how long this kind of setup will hold up before the first toe clip breaks off, but I'm hoping for the best here.

The original VPs, intact and sacrificed:




Last edited by sjanzeir; 08-13-18 at 01:00 PM.
sjanzeir is offline  
Old 08-12-18, 05:10 PM
  #636  
BF's Resident Dumbass
 
sjanzeir's Avatar
 
Join Date: Apr 2016
Location: Jeddah, Saudi Arabia
Posts: 1,566

Bikes: 1990 Raleigh Flyer (size 21"); 2014 Trek 7.6 FX (size 15"); 2014 Trek 7.6 FX (size 17.5"); 2019 Dahon Mu D9; 2020 Dahon Hemingway D9

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 1,493 Times in 496 Posts
One more thing - the rubber seals of those original Wellgos were shot as the bike sat behind a sun-drenched window at the showroom for months, so I had to finagle replacements. I dug out a pair of rubber caps - probably the kind used to plug holes in furniture; I couldn't tell you for sure - and cut out holes in the middle, then I slipped them over the ends of the shafts and had them shield the exposed ball bearings from the elements:





sjanzeir is offline  
Old 08-18-18, 06:07 PM
  #637  
Senior Member
 
Join Date: May 2012
Location: Yokohama, Japan
Posts: 112
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 0 Times in 0 Posts
Thank you Very Much!

Originally Posted by zammykoo
This one is not really a bike maintenance tip but something useful for those with the base model Park Tool repair stand. You can 3d print your own add-ons (if you have a printer or know someone who does).

Leg clip for storage:
https://www.thingiverse.com/thing:1272344

Tool caddy:
https://www.thingiverse.com/thing:1275681

Hex wrench bracket:
https://www.thingiverse.com/thing:1695559

Misc tool holder:
https://www.thingiverse.com/thing:49227
Simpletommy is offline  
Old 08-26-18, 06:30 PM
  #638  
Member
 
Join Date: Jun 2017
Posts: 27
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 5 Times in 1 Post
I think I'm posting this in the right place. Any tricks to unseizing this this stem?
depshop is offline  
Old 09-05-18, 09:12 AM
  #639  
Full Member
 
deephate's Avatar
 
Join Date: Apr 2012
Location: Iowa
Posts: 391

Bikes: COLNAGO! Litespeed, Motobecane, Peugeot, Gitane, Fuji, Nishiki, Centurion, Panasonic, Giant, Trek, Cannondale, Raleigh, Bianchi, Winsor

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Liked 17 Times in 11 Posts
Originally Posted by rmfnla
geez, 36 posts and nothing about making sure the beer is cold (& plentiful).

What's the wrenching world coming to..?
hear hear!!!
deephate is offline  
Old 09-14-18, 06:54 AM
  #640  
Senior Member
 
Join Date: Jan 2013
Posts: 2,652

Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 560 Post(s)
Liked 546 Times in 396 Posts
Google is your friend

Originally Posted by depshop
I think I'm posting this in the right place. Any tricks to unseizing this this stem?
If you google frame stuck stem or handlebar stuck, excellent sites of very knowledgeable people will come up, including my favorites, Park Tool, Sheldonbrown, davebikeblog, mytenspeeds, and many many more. Some stems are permanently bonded so good luck.
easyupbug is offline  
Old 09-14-18, 07:18 AM
  #641  
Senior Member
 
Join Date: May 2016
Location: Toronto, Ontario
Posts: 70

Bikes: 1993 Pinarello Vuelta Retroroadie / 1974 Raleigh Sprite

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by depshop
I think I'm posting this in the right place. Any tricks to unseizing this this stem?

Usually I would flip the bike upside down and spray penetrating oil down the fork so that it reaches the stem. Rinse and repeat every hour or two. The next day, I would flip the bike back over with the wheel in the fork, clamp the wheels with your leg and turn the stem to see if it's loosened up a little (it's easier with handlebars inside the stem). If that fails, keep trying that for the the next two or three days and if it still doesn't come out, then I resort to cutting the stem out.
novalyx is offline  
Old 09-15-18, 05:30 PM
  #642  
Junior Member
 
curbowman's Avatar
 
Join Date: Mar 2016
Location: Caracas, Venezuela
Posts: 158

Bikes: Imremo (cheap taiwanese mtb) and vintage Jupiter King (Japanese '70s road bike)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 73 Post(s)
Liked 8 Times in 7 Posts
The pictures are missing! Could you post them again, please?
curbowman is offline  
Old 11-23-18, 09:38 PM
  #643  
Senior Member
 
BikingTech's Avatar
 
Join Date: Nov 2018
Location: Idaho
Posts: 117
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Goat Head season never seems to end in my area. I had some Shoe Goo laying around and wondered if I could use it to repair my collection of old yet good tubes. After a few trials I was able to apply a thin enough layer to seal the small punctures. I figure I've saved a few bucks from new tubes and patch kits.
BikingTech is offline  
Old 12-27-18, 01:01 AM
  #644  
Junior Member
 
Join Date: Jul 2017
Posts: 15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Propane torch

Originally Posted by depshop
I think I'm posting this in the right place. Any tricks to unseizing this this stem?
I would clean out as much grease from the upper pressed race. maybe get the bearings out, breaking the cage, for good measure.

use a vice to hold the stem, support the rear triangle on a saw horse or chair.

find an area where you can safely use an open flame, grab a pair of insulated gloves.

use a propane torch to heat the fork steerer tube. It may turn red hot. Focus the heat on the part of the tube that is in contact with the stem.

the steel will expand as it gets hot. So will the aluminum stem. If you heat them both for too long, they will stay fused.


Give it a try, best to heat the fork up quickly, then grab the blades and twist. A stubby 2x4 in the fork crown can be a big help, but is also capable damaging the fork.

Last edited by 206Moser; 12-27-18 at 01:02 AM. Reason: Spelling
206Moser is offline  
Old 01-21-19, 12:57 PM
  #645  
Newbie
 
Join Date: Jan 2019
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Ebike Battery problems

Hi All, I have a Giant Twist Freedom DX.. it has been done for over a year and the battery is dead. What are my options?

Can the Battery be recharged? and if so how is this done?
chrisgill19 is offline  
Old 01-21-19, 01:11 PM
  #646  
Senior Member
 
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,647
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 835 Post(s)
Liked 1,053 Times in 739 Posts
Originally Posted by chrisgill19
Hi All, I have a Giant Twist Freedom DX.. it has been done for over a year and the battery is dead. What are my options?

Can the Battery be recharged? and if so how is this done?
Try asking in the Ebikes forum. https://www.bikeforums.net/electric-bikes/ You'll get much better response over there.
Crankycrank is offline  
Old 02-09-19, 11:07 AM
  #647  
Full Member
 
Join Date: Jun 2018
Posts: 358
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Liked 86 Times in 54 Posts
​​​​​​​

Last edited by krecik; 01-13-21 at 01:31 PM.
krecik is offline  
Old 02-09-19, 11:48 AM
  #648  
Full Member
 
Join Date: Jun 2018
Posts: 358
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Liked 86 Times in 54 Posts
​​​​​​​

Last edited by krecik; 01-13-21 at 01:31 PM.
krecik is offline  
Old 02-11-19, 08:51 PM
  #649  
Full Member
 
Le Mechanic's Avatar
 
Join Date: Sep 2015
Location: Denver Colorado
Posts: 337

Bikes: 2020 Pivot Vault, 1983 Rossin Record, Garneau R1, Mesamods home built gravel/rain commuter bike, 1995 Barracuda A2V modified with Surley single speed dropouts, 1969 Bottecchia junkyard special fixed gear, Cervelo P4, Mesamods 650b klunker

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 71 Times in 49 Posts
My latest video demonstrating SRAM Double Tap cable replacement...

Le Mechanic is offline  
Old 02-13-19, 03:08 PM
  #650  
Senior Member
 
ctpres's Avatar
 
Join Date: Jul 2012
Location: Creede CO in summer & Okeechobee, FL or TX Gulf Coast in winter
Posts: 742

Bikes: Zenetto Stealth road bike & Sundeal M7 MTN bike

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 90 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
Just had to cut a new 10 speed chain. OPS - old tool made for 7/9 speed. Ten minutes with a file and it now works with 10 speed chains.
ctpres is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.