How to reassemble chain without seizing link
07-23-07, 04:15 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Silver Spring, MD
Posts: 143
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How to reassemble chain without seizing link
I have an SRAM PC48 chain that I need to add a few links to now that I have a new, larger rear derailleur. I have the links that I originally removed from this chain recently, and thought it wouldn't be a big deal to add them back on - I've done such a thing in the past to other chains and it wasn't challenging. Today, as I'm trying to add the links, they're going on too tight/pinched such that it's seizing. I've removed and re-added a couple of times now, and just can't seem to get it right. I tried connecting two extra links off of my main chain to practice, and got them on 'normally' just once, after 3 tries, and I can't tell what I did different. Is there some trick?
07-23-07, 04:18 PM
#2
cyclist/gearhead/cycli...
Join Date: Oct 2004
Location: DC / Maryland suburbs
Posts: 4,166
Bikes: Homebuilt tourer/commuter, modified-beyond-recognition 1990 Trek 1100, reasonably stock 2002-ish Gary Fisher Hoo Koo E Koo
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Don't worry, this is completely normal for many brands of chains, and it is easy to fix.
When you press the pin back in, the link will normally stick and seize. To unseize it, simply grab the chain around the offending link, with your thumbs flat on the side plates of the neighboring links. FLEX the chain towards/away from your body a couple times (perpendicular to the direction that the chain links bend).
Flexing the chain in this way a couple times will normally loosen the link, allowing it to roll normally!
When you press the pin back in, the link will normally stick and seize. To unseize it, simply grab the chain around the offending link, with your thumbs flat on the side plates of the neighboring links. FLEX the chain towards/away from your body a couple times (perpendicular to the direction that the chain links bend).
Flexing the chain in this way a couple times will normally loosen the link, allowing it to roll normally!
Last edited by moxfyre; 07-23-07 at 04:29 PM.
07-23-07, 04:43 PM
#3
B-b-b-b-b-b-bicicle Rider
Join Date: Apr 2005
Location: Racine WI
Posts: 749
Bikes: 1997, stumpjumper S-works hardtail, Medici, Giant Perigee(track dropouts and fixed gear), Columbia twosome, schwinn twinn, '67 raleigh 5 speed internal hub, Old triumph 3 speed, old BSA 3-speed, schwinn Racer 2spd kickback, Broken raysport criteriu
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 5 Times
in
3 Posts
You can loosen the link by putting the offending pin back in the chain tool. But this time reverse the tool so it's on the opposite side of the chain and put the link back one set of "teeth" in the tool. This pushes the pin through only the near side of the tool as that 2nd step grabs the inside of the chain, and doesn't compress the link. Just be sure to leave a tiny little nub visible from the outside (ie, don't push the pin through), usually 1/4 to 1/2 turn of the chaintool will suffice.
07-23-07, 05:37 PM
#4
cycles per second
Join Date: Oct 2003
Location: Minnesota
Posts: 1,930
Bikes: Early 1980's Ishiwata 022 steel sport/touring, 1986 Vitus 979, 1988 DiamondBack Apex, 1997 Softride PowerWing 700, 2001 Trek OCLV 110
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 71 Times
in
48 Posts
Many chain tools have two positions for the chain. One for pressing in/out the pin, and one for loosening a stiff link.
07-23-07, 06:05 PM
#5
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Silver Spring, MD
Posts: 143
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the advice moxfyre, but apparently I'm too much of a wussy to push the plates out a bit. Gonzo, there's only one position on the cruddy nashbar chain tool that I have. I ended up just putting the chain back together with a very thin shim between the inner roller and the outer plate - that worked. I wasted a good 2 hours on this thing!
07-23-07, 06:12 PM
#6
cyclist/gearhead/cycli...
Join Date: Oct 2004
Location: DC / Maryland suburbs
Posts: 4,166
Bikes: Homebuilt tourer/commuter, modified-beyond-recognition 1990 Trek 1100, reasonably stock 2002-ish Gary Fisher Hoo Koo E Koo
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
07-23-07, 09:42 PM
#7
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Silver Spring, MD
Posts: 143
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I think I got it, you did a good job, it just wasn't happening for me. Perhaps I was just so frustrated after having at it for so long. I saw this thin piece of metal/foil that I could stick in there while I drove the pin in, then yank it out, and all was good.
