Pedals Move On Their Own
#1
Newbie
Thread Starter
Join Date: Jul 2007
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Pedals Move On Their Own
The pedals move on their own while not on the bike, just moving it by walking with the wheels rotating the pedals rotate as well. anyone know how to fix this?
#2
Pwnerer
#6
Senior Member
Join Date: Apr 2007
Location: Chili, NY
Posts: 733
Bikes: 88 Fisher Gemini tandem, 92 Trek 970, 07 Nashbar Frame, 08 Gary Fisher Paragon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Could be a broken spoke protector rubbing on the backside of the cassette or freewheel. I've also seen grass and weeds packed into these same areas that will cause the same thing. If it's not that, something in the freewheel or freehub is locked up.
#7
Senior Member
Join Date: Aug 2004
Posts: 736
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Freewheel/freehub friction. Unless it's so severe that the top of the chain is sagging when freewheeling riding the bike (which is bad news since the chain can get pulled, jam into the freewheel and take the rear derailleur with it), it's not a big issue. Lube the ratchet mechanism, make sure that there is no dirt stuck between the freewheel/cassette and the hub + spokes, make sure that if a dork disk is installed it's not jamming.
#8
Senior Member
Join Date: Jul 2007
Posts: 68
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Freewheel/freehub friction. Unless it's so severe that the top of the chain is sagging when freewheeling riding the bike (which is bad news since the chain can get pulled, jam into the freewheel and take the rear derailleur with it), it's not a big issue. Lube the ratchet mechanism, make sure that there is no dirt stuck between the freewheel/cassette and the hub + spokes, make sure that if a dork disk is installed it's not jamming.
but what if I don't know how to use the travel adjust Mr Lawyer?
#10
Newbie
Thread Starter
Join Date: Jul 2007
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
haha, sorry i may have explained it a bit indirect. what i mean is when i am on the bike and the wheels are moving say going downhill or just moving from momentum from cycling the pedals continue to move on their own while the wheels rotate, also in one occurence the chains bundled up and jammed at the rear pretty bad.
#12
Videre non videri
Join Date: Sep 2004
Location: Gothenburg, Sweden
Posts: 3,208
Bikes: 1 road bike (simple, light), 1 TT bike (could be more aero, could be lighter), 1 all-weather commuter and winter bike, 1 Monark 828E ergometer indoor bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
I've seen one bike where the cassette was so close to the spokes that it rubbed and dragged the cassette along with the wheel rotation. The owner had to add some kind of spacer to get enough separation, IIRC.
#13
Newbie
Thread Starter
Join Date: Jul 2007
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
it has nothing to do with the supernatural. could this be the cause of the plastic disc on my wheel behind the gears breaking or falling off?
#14
Mechanic/Tourist
The behavior you describe is from friction at the freehub. It may be the freehub itself has a friction problem or it may simply be that your bearings are adjusted too tightly. The hub should have play in it when off the bike if you move the axle up and down (wheel vertical) and no play when mounted. Without the wheel mounted but with the chain disengaged the wheel should slowly and gently rock to a stop.
#15
Senior Member
Join Date: Jul 2005
Location: Backwoods of Ontario
Posts: 2,152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
The other way is possible. If any pieces of the disc (known as a "dork disc") are still there, it may be those pieces that are stopping the freewheeling action. The plastic ages and becomes brittle and then break up on their own.
#16
Senior Member
Join Date: Aug 2004
Posts: 736
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The behavior you describe is from friction at the freehub. It may be the freehub itself has a friction problem or it may simply be that your bearings are adjusted too tightly. The hub should have play in it when off the bike if you move the axle up and down (wheel vertical) and no play when mounted. Without the wheel mounted but with the chain disengaged the wheel should slowly and gently rock to a stop.
#17
Mechanic/Tourist
First part of response is correct (freehub friction), but in the rest you confuse freehub bearings with wheel bearings. The freewheel bearings are usually not readily adjustable, and the "play... when off the bike... with the chain disengaged the wheel should slowly and gently rock to a stop" refers to wheel hub bearings, not freehub, so does not impact the OP's issue.