Stem Raiser
08-01-07, 05:32 PM
#1
Newbie
Thread Starter
Join Date: Aug 2007
Location: Bangor, N.Ireland
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Stem Raiser
Hi. I've just bought a Reebok Faith ladies mountain bike but after having cycled it I realised that the handle bars are too low. Could someone please tell me if I can raise them with a stem raiser. The stem and the bit that holds the handle bars seems to be all one piece. How do I get my handlebars raised? Do I need to buy a whole new stem + handlebars? I'm so confused, I only bought the bike to try to get fit and now I'm so uncomfortable on it I can't ride it. Someone please help.
08-01-07, 07:01 PM
#2
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
If you bought the bike from a bike shop, just go there and have them help you.
If you have to figure it out by yourself, there are two kinds of stems - "threaded" and "threadless"
I found a photo of the bike, and although I can't tell for sure, it sounds like you have threaded. Threaded stems are generally shaped like the number "7". This is also known as a "quill stem". There is a shaft that goes into the bike's head tube and thereby controls the front fork and wheel for steering when it turns. The bent part of the stem attaches to the handle bars.
See if these two links help:
https://sheldonbrown.com/gloss_st-z.html#stem
https://sheldonbrown.com/handsup.html#threaded
First step would be to see if the one you have can be raised - either by making it stick into the head tube less or, if it's adjustable, raising the angle of the part that attaches to the handlebars. It's hard to describe how to do it, but it's dead simple and if you bring it to a bike repair shop they could do it while you wait. IF they charge you for it, it would be negligable.
There is only so much you can raise a quill stem because they have "minimum insertion" lines for safety.
If that doesn't do it, you'll need to buy a new stem but they aren't super expensive. You'd want to get one that is longer in the vertical dimension so it would come up higher. You can also get one with a steeper angle which would also raise the bars.
If you have to figure it out by yourself, there are two kinds of stems - "threaded" and "threadless"
I found a photo of the bike, and although I can't tell for sure, it sounds like you have threaded. Threaded stems are generally shaped like the number "7". This is also known as a "quill stem". There is a shaft that goes into the bike's head tube and thereby controls the front fork and wheel for steering when it turns. The bent part of the stem attaches to the handle bars.
See if these two links help:
https://sheldonbrown.com/gloss_st-z.html#stem
https://sheldonbrown.com/handsup.html#threaded
First step would be to see if the one you have can be raised - either by making it stick into the head tube less or, if it's adjustable, raising the angle of the part that attaches to the handlebars. It's hard to describe how to do it, but it's dead simple and if you bring it to a bike repair shop they could do it while you wait. IF they charge you for it, it would be negligable.
There is only so much you can raise a quill stem because they have "minimum insertion" lines for safety.
If that doesn't do it, you'll need to buy a new stem but they aren't super expensive. You'd want to get one that is longer in the vertical dimension so it would come up higher. You can also get one with a steeper angle which would also raise the bars.
08-01-07, 07:26 PM
#3
Bike Junkie
Join Date: Jun 2005
Location: South of Raleigh, North of New Hill, East of Harris Lake, NC
Posts: 9,622
Bikes: Specialized Tarmac, Specialized Roubaix, Giant OCR-C, Specialized Stumpjumper FSR, Stumpjumper Comp, 88 & 92Nishiki Ariel, 87 Centurion Ironman, 92 Paramount, 84 Nishiki Medalist
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 68 Post(s)
Likes: 0
Liked 37 Times
in
27 Posts
Just to add to what Camilo said, you can also buy an adjustable stem, similiar to the stems found on hybrids today. When I buy a replacement stem I buy it at an LBS where they can measure the diameter of the handle bars and be sure the stem is correct for my handlebars.
__________________
Roccobike BF Official Thread Terminator
Roccobike BF Official Thread Terminator
08-02-07, 05:38 PM
#4
Newbie
Thread Starter
Join Date: Aug 2007
Location: Bangor, N.Ireland
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanku
Thankyou so much for helping me with my handlebar question. It was really enlightening. I'm going to take it to my local shop to see what they can do but at least I have a better idea what I'm talking about!! Thanks again
08-02-07, 05:41 PM
#5
Newbie
Thread Starter
Join Date: Aug 2007
Location: Bangor, N.Ireland
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for your help.
This is the first time I've been on this site and it's been great. You've really helped me to understand a bit more about my bike. As I'm sure you've guessed, I'm a complete novice but hey everyone's gotta start somewhere eh?! Thanks again.
08-02-07, 10:07 PM
#6
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
Take the time and see if you can watch while they adjust your stem. It really is very simple and a novice can learn to raise and lower a quill stem.
