Some compatiblity questions.
#1
Senior Member
Thread Starter
Join Date: Jul 2007
Posts: 141
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Some compatiblity questions.
With some money left over, I am going to buy a new crankset, but there are many versions of the same product. I decided on the 172.5mm arm length, but I am unsure how to match the bottom bracket information (english version or length) or whether the ultegra front derailleur will be compatible with the change from 50 to 53 teeth (website does not list which version of the fd is used)
I am looking at this product
If anyone has links to a good article on choosing a proper crankset/ bottom bracket, I would appreciate it
thanks
I am looking at this product
If anyone has links to a good article on choosing a proper crankset/ bottom bracket, I would appreciate it
thanks
#2
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
This is a Dura Ace 10-speed Hollowtech II crank and the spindle is part of the crank arms so there are no length issues. The "bottom bracket" is just a pair of threaded cups with the bearing built in so you need to get the correct threading.
AFAIK, there is only one model Ultegra double front derailleur and it is normally rated to handle 53-39 chainrings but Shimano also claims it will work properly with "compact" gearing (50-34) so it's a one-size-fits-all.
AFAIK, there is only one model Ultegra double front derailleur and it is normally rated to handle 53-39 chainrings but Shimano also claims it will work properly with "compact" gearing (50-34) so it's a one-size-fits-all.