Old Sequoia -- Higher stem
#1
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Memphis
Posts: 246
Bikes: 2008 Specialized Roubaix Elite Compact, 2004 Giant Cypress, 1981 Specialized Sequoia
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Old Sequoia -- Higher stem
I just bought an old Specialized Sequoia as a project bike . . . It's got the shifters in the drop-bar ends, so that's how old it is.
I throught maybe I could bring the bar height up some by raising the stem but I can't get the stem to budge. I've loosened the threaded collar as well as the hex bolt in the top of the stem. No go.
I realize there may be no more height to this stem once I budge it loose, so how do I determine what size it is before I seek a replacement, longer (higher) stem?
I throught maybe I could bring the bar height up some by raising the stem but I can't get the stem to budge. I've loosened the threaded collar as well as the hex bolt in the top of the stem. No go.
I realize there may be no more height to this stem once I budge it loose, so how do I determine what size it is before I seek a replacement, longer (higher) stem?
#2
Elitist Troglodyte
Join Date: Jun 2006
Location: Dallas
Posts: 6,925
Bikes: 03 Raleigh Professional (steel)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Use Liquid Wrench around the base of the stem and let it soak for a day. Then rap the hex bolt with a hammer until it frees up.
__________________
Stupidity got us into this mess - why can't it get us out?
- Will Rogers
Stupidity got us into this mess - why can't it get us out?
- Will Rogers
#3
Senior Member
Join Date: Jul 2005
Posts: 7,487
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 162 Times
in
89 Posts
I just bought an old Specialized Sequoia as a project bike . . . It's got the shifters in the drop-bar ends, so that's how old it is.
I throught maybe I could bring the bar height up some by raising the stem but I can't get the stem to budge. I've loosened the threaded collar as well as the hex bolt in the top of the stem. No go.
I realize there may be no more height to this stem once I budge it loose, so how do I determine what size it is before I seek a replacement, longer (higher) stem?
I throught maybe I could bring the bar height up some by raising the stem but I can't get the stem to budge. I've loosened the threaded collar as well as the hex bolt in the top of the stem. No go.
I realize there may be no more height to this stem once I budge it loose, so how do I determine what size it is before I seek a replacement, longer (higher) stem?
You may very well be fighting against galvanic corrosion, which means the aluminum stem may be bonded to the steel steerer tube. If this is the case, you may be in for a tough fight. Suggested remedies range anywhere from brute force to amonia to lye. I would try what DMF suggested first, and if it doesn't work use an oak dowel inserted into the bottom of the steerer tube to try and drive the stem loose from below. If you're not concerned with saving the stem, use a metal rod or pipe of the appropriate size in place of the dowel. Beyond that, one of the chemical solutions is probably your only hope-
#4
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Memphis
Posts: 246
Bikes: 2008 Specialized Roubaix Elite Compact, 2004 Giant Cypress, 1981 Specialized Sequoia
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Great, got it loose! I nosed around on Sheldon Brown's site and he suggested the same rubber-mallet rap on the loosened hex bolt that you guys did (saw Sheldon's tip before I saw your posts) and the stem came right out. I was able to raise the stem to the "minimum insertion point" marked on it, so I bought about an inch or so. I think I still might want it a bit higher for touring, so I'm going to explore a new stem.
So . . . I'll have to figure out what new stems will fit. Any clues about this will be much appreciated, too.
Also trying to figure out just how old this bike is . . . the bike I had back in the 70s had the down-tube shifters . . . I guess I missed the end-of-the-bars shifters . . . When were they popular?
So . . . I'll have to figure out what new stems will fit. Any clues about this will be much appreciated, too.
Also trying to figure out just how old this bike is . . . the bike I had back in the 70s had the down-tube shifters . . . I guess I missed the end-of-the-bars shifters . . . When were they popular?
#5
Senior Member
Join Date: Jul 2005
Posts: 7,487
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 162 Times
in
89 Posts
For a REALLY high, traditional quill stem, the Nitto Technomic stem is the ticket. Harris Cyclery (go to Sheldon's site) carries them. You'll need to determine your handlebar clamp diameter (25.4 or 26.0), and how long you want the forward extension to be.
As for the bar-end shifter question, they've been around a long time, since at least the '70's. They're still pretty popular on touring bikes-
As for the bar-end shifter question, they've been around a long time, since at least the '70's. They're still pretty popular on touring bikes-
#6
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Memphis
Posts: 246
Bikes: 2008 Specialized Roubaix Elite Compact, 2004 Giant Cypress, 1981 Specialized Sequoia
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the info, wb.
#7
Senior Member
Join Date: Jul 2005
Posts: 7,487
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 162 Times
in
89 Posts
No problemo. If you want to determine the date of the components on your bike, go to the vintage trek site, and check out the section titled "component dates." You'll need to find date codes on your cranks, derailleurs, etc., and assuming they're original equipment on the bike, you can figure out how old the bike is-
www.vintage-trek.com
www.vintage-trek.com
#8
just keep riding
Join Date: Feb 2005
Location: Milledgeville, Georgia
Posts: 13,560
Bikes: 2018 Black Mountain Cycles MCD,2017 Advocate Cycles Seldom Seen Drop Bar, 2017 Niner Jet 9 Alloy, 2015 Zukas custom road, 2003 KHS Milano Tandem, 1986 Nishiki Cadence rigid MTB, 1980ish Fuji S-12S
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 33 Times
in
22 Posts
+1 for the Nitto Technomic or Technomic Deluxe. Bar end shifters are still popular on my bikes. (and not just touring bikes)