Did I rupture come sort of bearing in my pedal?
#1
Member
Thread Starter
Join Date: Mar 2008
Location: Madison, WI
Posts: 28
Bikes: 1980 Fuji road mashup
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Did I rupture some sort of bearing in my pedal?
One of my Wellgo LU-961 pedals started creaking badly and i noticed some sort of greasy goo on the crank arm side of the spindle where the moving and non-moving part of the pedal meets. I'm thinking I ruptured some sort of bearing in the pedal and the grease is from inside the spindle mechanism, i've never applied any sort of grease myself to those newish pedals...any thoughts. I've attached a pic.
Last edited by lamberticus; 06-20-08 at 05:54 PM. Reason: Messed up title
#2
Numbnuts
Join Date: May 2005
Location: Bozeman, MT
Posts: 128
Bikes: KHS 555, Trek 820 converted to cruiser/winter bike, Trek 520 singlespeed conversion.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I don't think so. Do they still spin smooth?
#3
Member
Thread Starter
Join Date: Mar 2008
Location: Madison, WI
Posts: 28
Bikes: 1980 Fuji road mashup
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The one pedal spins ok, but now creaks a lot when mashing down on the pedal...the other pedal is fine--no grease and no creaking. The creaking and the grease emission occurred pretty much simultaneously.
#4
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,216
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 347 Times
in
226 Posts
sometimes (most of the time?) pedals come from the pedal factory poorly adjusted. Yours might need adjustment, maybe some new grease in the right places.