Jagwire Racer Kit
Will this kit work with an older Nishiki with Dia-compe brakes? I cant seem to find anything that shows cable ends or any kind of photos.
|
a link would be nice.
If the kit is specified as for road bikes then you're good to go. If it says mountain bikes then you're not unless you swapped over the bars and levers at some point in the past. |
Sorry... here it is.
http://www.ebikestop.com/jagwire_rac...red-CA6168.php Do Shimano, Campy, and SRAM all use the same cable ends for shifters and derailers? |
Originally Posted by smovlov
(Post 7645948)
Do Shimano, Campy, and SRAM all use the same cable ends for shifters and derailers?
Jagwire makes double ended derailleur cables that have a Shimano fitting on one end and a Campy fitting on the other and you cut off the one you don't need. Bike Tools Etc. sells them. As to the end that fastens to the derailleur clamp bolt, yes they are the same (i.e. plain wire) for every make. |
Well, it says road brake kit right on the package so that settles that.
I didn't know that about the Campy shifter cable ends. I'll have to file that away for some day. Thanks. Er... the brake ends are the same as Shimano, right? I've never had Campy stuff. |
Originally Posted by BCRider
(Post 7647325)
Well, it says road brake kit right on the package so that settles that.
|
Originally Posted by BCRider
(Post 7647325)
I didn't know that about the Campy shifter cable ends. I'll have to file that away for some day. Thanks.
Er... the brake ends are the same as Shimano, right? I've never had Campy stuff. Actually Campy brake cable ends are also a bit smaller than Shimano but the consequences of using the wrong ones aren't nearly as bad as the ends are more accessable. In fact, one bike shop I know of does file Shimano brake cable ends down to use them in Ergos. |
Originally Posted by HillRider
(Post 7647762)
Well, that's one way to make them fit. :) ....
|
Originally Posted by BCRider
(Post 7648670)
BADDABOOMP, CHSHSHshsh..... that's the old vaudeville drum and cymbal sound used for those bad old jokes if you're wondering.... :lol:
|
The Racer kit has both campy and shimano ends on both shift and brake cables. Just snip off the one you aren't going to use
|
All times are GMT -6. The time now is 05:45 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.