Shimano Saint
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Natick MA
Posts: 148
Bikes: Specialized P2, Cove G Spot
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I heard the Shimano Saint has some compatability issues. Is it with a bottom bracket? or crankarms
or other non-Shimano Saint chainrings?
or other non-Shimano Saint chainrings?
#2
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,765
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,294 Times
in
819 Posts
Since Shimano traditionally used a standard 2-degree square BB spindle taper with an oddball end dimension, and since chainring BCDs and BB shells are pretty well standardized, I would not be at all surprised if there were some sort of problem in crank-to-spindle fit.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#3
645f44
Join Date: Sep 2003
Location: Oxford, Uk
Posts: 482
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Saint uses the new shimano bb with outbound bearings and 2 piece cranks (Hollowtech II?). Since you can only use a shimano bb I doubt it has problems.
I guess the problems if they exist could be with rings, frames or guides.
I guess the problems if they exist could be with rings, frames or guides.