Is the square taper of 2005 Chorus the same as the old?
#1
Senior Member
Thread Starter
Is the square taper of 2005 Chorus the same as the old?
I'm still totally confused by all the different BB/Crank combinations. I have a Zeus BB and crank on my 1981 Davidson, and I have a 2005 Chorus/BB to use on it if I want. The Zeus is a Campy compatible copy from the time. While they are both English thread, and therefore I could swap the BB, can I use the new crank on the old BB without doing the BB? My main reason for wanting to swap is the somewhat lower 39 tooth small ring. The Zeus has a 52/42, the Campy 53/39. Also, I use a 10speed chain and the narrower teeth of the Campy would be a little less noisy.
I had read in a thread that the newer square taper BBs use the JIS standard, and the old ones were a different standard.
I had read in a thread that the newer square taper BBs use the JIS standard, and the old ones were a different standard.
#3
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
Campy has always used an ISO square taper.
#4
Senior Member
Thread Starter
I guess I can give it a try. There's lots of winter left to think about this.