Can I install A 07 Deore front derailleur on a 1996 steel frame.
#1
Senior Member
Thread Starter
Join Date: May 2008
Location: Dacula,Ga
Posts: 402
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Can I install A 07 Deore front derailleur on a 1996 steel frame.
I want to install a Deore front derailleur on my 1996 Gary Fisher HKEK.And I know most of you all know this but, being its a old steel frame, the tube is smaller than today's aluminum frames . I am guessing someone makes shims for this very purpose? If thats the case where can I get them, if not the case any other suggestions?
#2
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Some Shimano FD's come with three different diameter bands to choose from - including the 28.6mm. Ask your LBS if they have one that'll fit you.
#3
Shop Wench
Join Date: Mar 2009
Location: California
Posts: 284
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#4
Senior Member
Thread Starter
Join Date: May 2008
Location: Dacula,Ga
Posts: 402
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks, but the problem is, its installed on another bike that it came stock on. "hence no packaging" That bike is going to get a XT as a replacement. So I am wanting to install the Deore on my beater bike. I just need to find some time to go to the shop I deal with and ask them. They have a really good mech, who wont give me any BS.
#5
Senior Member
You could just wrap it with inner tube.
#6
Senior Member
Thread Starter
Join Date: May 2008
Location: Dacula,Ga
Posts: 402
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#7
Senior Member
Join Date: Oct 2008
Location: Right where I'm supposed to be
Posts: 1,632
Bikes: Franklin Frames Custom, Rivendell Bombadil
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Liked 209 Times
in
127 Posts
Ask any LBS if they can spare a 28.6 shim, they should have some leftovers.
#8
Senior Member
Join Date: Jul 2005
Location: Backwoods of Ontario
Posts: 2,152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
This particular XT FD appears to accomodate three seat tube sizes.
https://www.jensonusa.com/store/produ...erailleur.aspx
Does this bike and the donor bike have different seat tube diameters?
Is it possible that you'll get the shim you need with the XT FD?
https://www.jensonusa.com/store/produ...erailleur.aspx
Does this bike and the donor bike have different seat tube diameters?
Is it possible that you'll get the shim you need with the XT FD?