203mm post mount install
 

I know this may be a very noob thing to ask, but I cant seem to figure this out. Im installing a 203mm rotor for the front braking system. Im using Avid BB7s.

I have this adapter:http://www.pricepoint.com/detail/167...-Included).htm (the lower tright one.)

There are 4 holes. 2 are threaded and 2 are not. I haven't installed 203mm adapters before, and the others (ie. 160mm and 185mm) have only 2 holes, which bolt right on the the fork. Ive tried different combinations, but haven't figured out where to put the bolts. Either way, the mount seems to be too small. Its spacing is about the same size as a simliar Avid 185mm adapter.

Can someone lead me in the right direction, or post a photo with your setups on the adapter and caliper?

Here's the BB7 manual. It has a picture of the 203mm bracket with the caliper lined up.

http://sram.com/_media/techdocs/08%2...%20Rev%20C.pdf

Yeah..i followed that picture. It seems I would need more CPS spacers for the top bolt. There is an empty space. Its not straight forward like the other adapters. Anyone have this problem or recognize this inconsistency?
http://i4.photobucket.com/albums/y12...mount203mm.jpg