7800 drive train w/ 6700 cassette?
#1
Member
Thread Starter
Join Date: Dec 2007
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
7800 drive train w/ 6700 cassette?
Do they mix well? The 6600 12/27 is pretty hard to get now (for a reasonable price) and the 6700 11/28 looks like it might work. I'm just wondering if anyone has tried this combo.
I know that the RD is designed to accommodate a max of 27, but they usually design in a conservative manner and I'm guessing a 28 max should be fine.
Thanks to all the gurus in advance!
I know that the RD is designed to accommodate a max of 27, but they usually design in a conservative manner and I'm guessing a 28 max should be fine.
Thanks to all the gurus in advance!
#2
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Almost everyone who had tried it says a Shimano road rd will accept a 28 or even a 30T big cog so you should be ok.
BTW, can you find the 5600 (105 level) 12x27 cassette? Except for a very minor weight difference it's every bit as good as the 6600.
BTW, can you find the 5600 (105 level) 12x27 cassette? Except for a very minor weight difference it's every bit as good as the 6600.