SRAM V-Brake -- One Side Sticks
I'm having a problem with the front brake on my recumbent. It is a 2002 SRAM 9.0 V-brake. I recently had the wheel off for repair and the brake worked fine until then. Now the left side stays on the rim when the brake lever is released. I tried WD-40 on it with no results. When I disconnect the quick release for the noodles, both sides of the brake seem to move freely and spring back.
Thanks for any help Mike |
Originally Posted by Goldrush
(Post 10167414)
I'm having a problem with the front brake on my recumbent. It is a 2002 SRAM 9.0 V-brake. I recently had the wheel off for repair and the brake worked fine until then. Now the left side stays on the rim when the brake lever is released. I tried WD-40 on it with no results. When I disconnect the quick release for the noodles, both sides of the brake seem to move freely and spring back.
Thanks for any help Mike |
Is the wheel centered in the fork?
|
Check the tension screw(s) in the arms, maybe one fell out. I had that happen sometime back to me.
|
Is the position of the noodle or the cable housing different now than before you removed the wheel?
|
|
All times are GMT -6. The time now is 09:03 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.