![]() |
Rear Wheel locking when turned
Hey, I'm new to maintaining my bike, anyways I decided to pull it apart and grease the bearings, now that its back together the wheel locks up when turned one way(in the forward direction), then loosens when turned the other, anyone have any ideas? I'm not sure what to look at, but have pulled it apart and reassembled hoping to spot the problem...
|
1) Verify this happens with the wheel off the bike
2) If it is, pull it apart an verify correct # of bearings installed 3) Please tell us what wheel it is |
My guess is that the cone is not locked to the lock nut and is turning with the wheel.
When adjusting the axle, you need to lock the cone against the thin nut with a cone wrench. |
Originally Posted by operator
(Post 10282960)
1) Verify this happens with the wheel off the bike
2) If it is, pull it apart an verify correct # of bearings installed 3) Please tell us what wheel it is |
| All times are GMT -6. The time now is 12:56 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.