Cervelo slc triple crank?
#3
Junior Member
Thread Starter
Join Date: Sep 2007
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
thanks a lot. A good friend says that we probably could figure it out, basically would have to get new drive train components but it probably could be done
#4
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Sure it's possible. You will need the crank, possibly a new bottom bracket (depending on what type of crank you now have and what replacement choose) and likely a new triple front derailleur. Also depending on the model of your shifters, you may need to change the left (front) shifter for a triple compatible version. Your rear derailleur may need to be changed or you will have to live with its limitations.
So, it could be a cheap as just a new crank and fd or quite expensive if you need to change the bottom bracket, rear derailleur and brifter also.
So, it could be a cheap as just a new crank and fd or quite expensive if you need to change the bottom bracket, rear derailleur and brifter also.