Swapping internal of 6 spd downtube shifter with 9 spd bar end shifter
#1
Newbie
Thread Starter
Join Date: Mar 2010
Posts: 73
Bikes: Bianchi, Specialized, Raleigh
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Swapping internal of 6 spd downtube shifter with 9 spd bar end shifter
Need help, my rear wheel is the old uniglide 6 speed hub and it is perfectly good wheel and cassette is still new. There is no opportunity of changing the hub to install 9 spd cassette. I am not interested in buying new wheel.
But I want indexed 6 spd. shifts on the 9 spd. bar ends which I currently run in friction mode. It would be nice not to adjust on hilly climbs. I don't think there is such a thing as 6 spd. bar end shifter.
Can I easily (compatible) swap the internals of the 6 spd. indexing mechanism to the 9 spd. bar end so I can have the indexing of the 6 spd. rear shifts? Thanks!
But I want indexed 6 spd. shifts on the 9 spd. bar ends which I currently run in friction mode. It would be nice not to adjust on hilly climbs. I don't think there is such a thing as 6 spd. bar end shifter.
Can I easily (compatible) swap the internals of the 6 spd. indexing mechanism to the 9 spd. bar end so I can have the indexing of the 6 spd. rear shifts? Thanks!
#2
Senior Member
Without make/model numbers who knows. But chances are that No, you won't be able to swap internals. And indexing was way over-rated on 6s anyway, 9s and 10s, not so much.
__________________
1984 Cannondale ST
1985 Cannondale SR300
1980 Gary Littlejohn Cruiser
1984 Trek 760
1981 Trek 710
Pics
1984 Cannondale ST
1985 Cannondale SR300
1980 Gary Littlejohn Cruiser
1984 Trek 760
1981 Trek 710
Pics
Thread
Thread Starter
Forum
Replies
Last Post
special_k
Bicycle Mechanics
7
03-07-11 04:06 PM
sunstealth
Cyclocross and Gravelbiking (Recreational)
1
07-16-10 07:35 PM