Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Identifying wheel characteristics

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Identifying wheel characteristics

Old 09-20-10, 07:43 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Dec 2009
Posts: 614
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Identifying wheel characteristics

As i research more on ride quality/performance etc, i realize how much farther the worm hole goes. I understand that tire/rim choice can make a HUGE difference on the comfort of a ride over longer distances etc. But how does one identify such characteristics without having to spend $$$$$ riding each set of wheels 40+ miles? Obviously extreme example is going to be some 50mm aero rims vs some Mavic Aksiums the aksiums are going to ride 'smoother' (less harsh).

How do i go about choosing a comfort and performance set of wheels for different types of rides
adam_mac84 is offline  
Old 09-20-10, 08:24 PM
  #2  
Senior Member
 
Join Date: Feb 2005
Location: Oklahoma
Posts: 9,438

Bikes: Trek 5500, Colnago C-50

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times in 6 Posts
If you ride hills go for lighter weight, as long as the wheels are strong enough for the load and road conditions. Comfort has a lot more to do with tires than rims.
Al1943 is offline  
Old 09-21-10, 04:15 PM
  #3  
DLM
Senior Member
 
Join Date: Nov 2009
Posts: 78
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
+1 A couple pounds of pressure difference in the tire is going to affect the "smoothness" of the ride more than the wheel. Choose wheels based on the cost/durability/weight/aerodynamics spectrum.
DLM is offline  
Old 09-21-10, 04:58 PM
  #4  
Senior Member
 
Join Date: Feb 2009
Posts: 6,660
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 582 Post(s)
Liked 171 Times in 138 Posts
Your weight is the determining factor in wheel weight. If you are a 190 or higher you should have a 36 hole slightly heavier rimed wheel.
The tire size is determined by the bike. Many of the so called racing bikes can't clear anything over 25mm wide.
Tire rolling resistance is determined by tire flexibility and proper pressure.
https://www.adventurecycling.org/res...SIRX_Heine.pdf
davidad is offline  
Old 09-22-10, 12:42 AM
  #5  
Senior Member
 
BCRider's Avatar
 
Join Date: Mar 2008
Location: The 'Wack, BC, Canada
Posts: 5,556

Bikes: Norco (2), Miyata, Canondale, Soma, Redline

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 45 Times in 35 Posts
I'm not sure I totally agree with davidad on the need for 36 spoke wheels. I'm easily over 200 lbs with riding gear and a backpack on me. But not by much. I've ridden 32 spoke wheels for years now with no issues towards reliability or durability.

For ease of self maintanence stick with regular style spokes and spoke counts. No minimal or grouped spoke boutique wheels. Just good builds with 28 front and 32 spoke rear for unloaded riding with higher spoke count wheels for bigger loads.

Most of my own riding is stop and go sort of city rides. For this use light weight at the rim and tire will easily be felt as a bike that sprints to speed from a start a lot easier. From personal experience the lighter the rim and tire the more you'll feel like you're wearing a big Superman S on your shirt or jersey. But if a lot of your riding will be done on country roads where you ride for longer distances with none of the block by block stopn'go of city riding then the deeper dish streamline wheels may serve you well if you can keep up the sort of speed that makes their streamlining beneficial.
BCRider is offline  
Old 09-22-10, 02:25 AM
  #6  
Senior Member
 
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times in 222 Posts
Light is always nice, but not at the cost of breakages along the road. (unless if you're competing, when a lighter wheel might be the difference between a podium finish or not. If you feel that a DNF is same, same as finishing in the pack, this might be an option)

Earlier posters make good points about traditional builds and the importance of tire pressure.
The precise number of spokes needed is hard to determine. Between build quality and riding style there's a huge space for varying experiences.
(ignoring differences in build quality) A cautious but heavy cyclist, good at going light and staying on nice surfaces can get away with a lot of things which would leave a lighter cyclist with a harsher ride stranded along the roadside.

But the main thing is that as long as you stay away from spontaneously taco-ing wheels and clearance issues everything else (with the possible exception of disc wheels) will still be rideable. The performance curve is a smooth hump rather than a sharp peak, so whatever you get will still be useable.
dabac is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
armybikerider
Road Cycling
10
05-17-19 10:31 AM
Jixr
Road Cycling
12
05-12-17 12:57 PM
TJohnson
Commuting
51
06-30-16 02:37 PM
michael_runs
Road Cycling
6
07-07-15 09:57 AM
LamontC
Road Cycling
12
04-22-13 04:59 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.