Bottom bracket spanner.... Which one????
 

Tried taking off my bottom bracket from my Falcon Ernie Clements today and boy did I struggle.

After spending an hour getting the LH crank arm off, I realized that I didn't have a spanner to get the RH bearing cup off..

This is the only way to get it off ...... Is it**********

What spanner is it**********

I think it's like this one in the pic... That spanner size on the left hand of the pic, what is it???

http://bike-vintage.eu/ebay/FOTO/sup...ae/foto101.jpg

Or am I being silly. I tried to screw the cup from the LH side, which was mega stuck in!!

Some combination of these two things ought to do. You should be able to acquire both at a total cost of less that 30 bucks.

http://www.parktool.com/product/cran...acket-wrench-1

http://www.parktool.com/product/cran...bracket-wrench

As for one side being mega stuck in, thats supposed to be that way (although your reference to LH side is confusing me since most adjustable BBs I have had have the fixed -- aka "mega stuck" -- cup on the RH--i.e. drive -- side, but perhaps some are reversed as would appear to be case if picture you show is oriented correctly). One side of BB has a fixed cup (the cup with the wrench flats on two sides) and is designed to be tight. The opposite side, with the notched lock ring, is the adjustable side. When BB adjustments are required, you use hook spanner wrench to loosen the lock ring, then the pin spanner to turn the actual cup, which is only tight enough to remove play but not tightened so much that the balls cant move freely. Unless completely dismantling the bike, you leave fixed cup in place and service bearings from the opposite side after you remove lockring, adjustable cup, and spindle. You just extract the bearings from the fixed cup side by pulling through the BB shell from the opposite side.

Like this maybe?

http://www.parktool.com/uploads/thum...38_430x390.jpg


Update: Beaten to the punch! :)

Right side cup is left hand threaded, exception, France and Italy,
Their bikes not the whole country.

Mr Fly that spanner could work,. but I have no access to use it as the chain ring is in the way, what size is this usually???

And DOS the links aren't loading :(

You have to remove the cranks to get to the BB. If links won't load, just go to Parktool.com and search on "bottom bracket tool". Or google it.

edited to add: The 1st link, by the way, is same tool that Mr. Fly posted. 2nd link is hook spanner for BB lockrings