Installing Shifters
#1
Ride bike or bike ride?
Thread Starter
Join Date: Oct 2003
Location: Adelaide, Australia
Posts: 1,447
Bikes: MongoosePro DH, Dart custom road bike, .243 Racing FR street bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Installing Shifters
I need a new rear shifter for my mountain bike and am wondering, how do you actually connect the cable to the shifter? It's going to be a Shimano Deore 8spd shifter.
#3
Senior Member
Join Date: Oct 2004
Posts: 700
Bikes: Cannondale CAAD10 Team, Giant TCR
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Hopper
I need a new rear shifter for my mountain bike and am wondering, how do you actually connect the cable to the shifter? It's going to be a Shimano Deore 8spd shifter.
Brand new shifters almost always comes with shifter cables. If not, read on...
1. Remove the top cap via the two screws.
2. Look for the shifter cog below the spring retainer plate (white plastic cog)
3. Unthread the cable by pushing it through the barrel adjuster/cog.
4. Replace the cable. The cable stopper should fit snugly into the recess on the side of the cog.
5. Put the cap back on.
Hope this is clear enough.
#4
Ride bike or bike ride?
Thread Starter
Join Date: Oct 2003
Location: Adelaide, Australia
Posts: 1,447
Bikes: MongoosePro DH, Dart custom road bike, .243 Racing FR street bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks