Taking chain apart and its affect on strength and reliability
07-11-11, 01:46 PM
#1
Senior Member
Thread Starter
Join Date: Oct 2010
Location: NOLA
Posts: 103
Bikes: 06 KHS flite 300 00 Cannondale F1000
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Taking chain apart and its affect on strength and reliability
My chain, Dura Ace 7800, is a little to short. Would it negatively affect the overall reliability of the chain to add the extra links I need? Or would it be better just to leave it the way it is? I do not absolutely need any more links the only gears I cannot go to are gears I should never be using anyway, 53-27 and 53-25.
As for piece of mind I wouldn't mind having the chain the proper length. Thanks for any help you can offer.
As for piece of mind I wouldn't mind having the chain the proper length. Thanks for any help you can offer.
07-11-11, 02:11 PM
#2
Senior Member
Join Date: Nov 2008
Location: Bay Area, Calif.
Posts: 7,239
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Add the links, but use the special pin for that purpose. Too easy to mess up sometime while climbing a hill and doing some serious damage to your bike, or even causing a crash by inadvertently shifting into one of those 'forbidden' gears.
07-11-11, 05:55 PM
#3
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,317
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1437 Post(s)
Liked 1,085 Times
in
720 Posts
+1 on adding the links. Murphy's Law dictates that you will shift into one of the "forbidden" gears; the damage/injury will have happened before you know what hit you.
07-11-11, 06:58 PM
#4
Advisor
Join Date: Mar 2008
Location: Central New Jersey
Posts: 544
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'd add the links but use chain breaker and do it with the rivets. Just be careful when you press it in that you don't bend the side plate or push the rivet to far on either side.
07-11-11, 07:39 PM
#6
Banned
Rohloff makes a chain tool to do a decent re riveting job..
https://www.rohloff.de/en/products/revolver_3/index.html
https://www.rohloff.de/en/products/revolver_3/index.html
Last edited by fietsbob; 07-11-11 at 07:44 PM.
07-11-11, 07:44 PM
#7
people's champ
Join Date: Oct 2010
Location: joisey
Posts: 1,517
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Rohloff makes a chain tool to do a decent re riveting job..
https://www.rohloff.de/en/products/revolver_3/index.html
https://www.rohloff.de/en/products/revolver_3/index.html
07-11-11, 07:58 PM
#8
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 37,120
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 132 Post(s)
Tagged: 1 Thread(s)
Quoted: 4989 Post(s)
Liked 1,098 Times
in
642 Posts
As long as you use the Shimano made closing pin, your chain with 2 splices will be as strong as it would be with only one.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
“Never argue with an idiot. He will only bring you down to his level and beat you with experience.”, George Carlin
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
“Never argue with an idiot. He will only bring you down to his level and beat you with experience.”, George Carlin
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
07-11-11, 09:12 PM
#9
Senior Member
Thread Starter
Join Date: Oct 2010
Location: NOLA
Posts: 103
Bikes: 06 KHS flite 300 00 Cannondale F1000
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Where would I find the shimano approved links? Thanks for all the replies!
07-11-11, 09:17 PM
#10
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 37,120
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 132 Post(s)
Tagged: 1 Thread(s)
Quoted: 4989 Post(s)
Liked 1,098 Times
in
642 Posts
But if you prefer, you can close the chain with a connecting link from KMC or others. these are also readily available. With the pin or link, be sure to get one that matches your chain's width.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
“Never argue with an idiot. He will only bring you down to his level and beat you with experience.”, George Carlin
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
“Never argue with an idiot. He will only bring you down to his level and beat you with experience.”, George Carlin
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
07-11-11, 09:26 PM
#11
Senior Member
Join Date: Dec 2009
Location: Westwood MA (just south of Boston)
Posts: 2,215
Bikes: 2009 Trek Soho
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've had great luck with the KMC powerlinks. after being stranded 40 miles from home once, I now carry a chain tool and a KMC powerlink on every long ride.
