Help! Stripped bolt on rear nutted brake
#1
Junior Member
Thread Starter
Join Date: Aug 2008
Posts: 88
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Help! Stripped bolt on rear nutted brake
Hello all, so I was tighening the bolt where the rear brake on my old Trek bike attaches to the frame and I guess I overtightened it. Now the nut wont tighten or come off, it just spins on the bolt. Any ideas on how to get it off of there?
#2
Senior Member
You mean a caliper brake attached to the seatstay bridge and there was incorrect spacing relative to the threaded bolt so that now the nut is stripped and spins over the bolt? Or do you mean a disk brake bolted to the right rear chainstay? You'll have to cut the nut or bolt and look for replacements at the hardware or speciality fastener store. I'd use a cutting wheel on my dremel tool.
Last edited by Clem von Jones; 07-21-11 at 10:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
hhnngg1
Bicycle Mechanics
8
05-09-17 02:07 PM
newbie1234
Bicycle Mechanics
4
08-23-13 01:43 PM
Gabedamien
Bicycle Mechanics
7
07-20-13 09:12 PM