Headset reassembly (HELP)
 

I looked all over the internet and this forum but couldn't find the answer.

I have a CAAD 10 I took apart the headset on...and now I can't get it back correctly. When I reinstall, either the headset is too loose or everything is so tight the front wheel can barely be turned.

I just can't remember how to put the bearings on correctly. This is what's inside, except for the black ring at far right

http://www.cannondale-parts.de/Headset-CAAD-10

I am reasonably certain the bottom bearing (just above front brake) goes on with the flat edge down and the rounder side up. Is the top bearing the same? And where does the ring with the slit go? $%#&!

edit: Actually, the black ring at far right in the picture is the very bottom piece, on the top of the fork.

Yeah, the beveled sides of the bearings face eachother. The silver split ring goes on top of the upper bearing, with the bevel downwards... it keeps the fork centered in the upper bearing. The big black CANE CREEK cone goes on top of that, and if its edge is hitting the frame you'll need some thin wafer spacers under it, so it clears the frame.

Beveled side of bearing face the cups in the head tube

http://en.wikipedia.org/wiki/File:Bi...ed_view-en.png