Converting a 1 1/8" headtube to use a quilled stem ??
#1
Senior Member
Thread Starter
Join Date: Apr 2008
Posts: 352
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Converting a 1 1/8" headtube to use a quilled stem ??
I've just acquired (for free) a great commuting frame without fork. It has a 1 & 1/8 inch head tube. Is there a means of converting this so I could use an "old fashioned" 1 inch quill stem?
#2
Senior Member
Join Date: Jun 2007
Location: A Coffin Called Earth. or Toronto, ON
Posts: 12,257
Bikes: Bianchi, Miyata, Dahon, Rossin
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
there are 1-1/8" threaded to 1" threaded adapter shims for such things.
I don't recall a 1-1/8 threadless to 1" threaded.
but why? it's like cherry picking the worst aspects of both systems.
I don't recall a 1-1/8 threadless to 1" threaded.
but why? it's like cherry picking the worst aspects of both systems.
__________________
Food for thought: if you aren't dead by 2050, you and your entire family will be within a few years from starvation. Now that is a cruel gift to leave for your offspring. ;)
https://sanfrancisco.ibtimes.com/arti...ger-photos.htm
Food for thought: if you aren't dead by 2050, you and your entire family will be within a few years from starvation. Now that is a cruel gift to leave for your offspring. ;)
https://sanfrancisco.ibtimes.com/arti...ger-photos.htm
#4
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,671
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5767 Post(s)
Liked 2,541 Times
in
1,407 Posts
Quill stems require a threaded headset (at one time there was an adapter, but I don't think it exists anymore). If you have a threaded 1-1/8" fork, you can find a split sleeve with a 1/16" wall to reduce the ID from 1" to 7/8". Or if you have a 1" threaded fork you might find headset reducer sleeves for your frame.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#5
Constant tinkerer
Just get a 1 1/8" threadless fork, 1 1/8" threadless headset, and 1 1/8" threadless stem. Putting a 1" threaded stem in would make no sense at all. Note that 1 1/8" threaded systems do exist. My 1995 Gary Fisher Tassajara has a 1 1/8" threaded headset and stem which are original to the bike.
#6
Senior Member
Join Date: Jan 2012
Location: Spokane, WA
Posts: 2,243
Bikes: Specialized Sequoia Elite/Motobecane Fantom Cross Team Ti/'85 Trek 520
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I would not be surprised if the OP is like me and has access to a bike coop which has a lot of cheap parts but not much in the way of newer stuff. My coop doesn't have any threadless non-suspension forks after I snagged the only one recently. Well they do have a couple but they are cheaper suspension front forks I think.
I tried finding a cheaper threadless front fork on CL and couldn't find anything other than one guy who wanted to sell me a carbon front fork off of a Scott Speedster but I didn't want to spend that kind of money.
I tried finding a cheaper threadless front fork on CL and couldn't find anything other than one guy who wanted to sell me a carbon front fork off of a Scott Speedster but I didn't want to spend that kind of money.
#8
Senior Member
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times
in
222 Posts
If you still need to get a fork there's little point on going frankenbike on the assembly. There are ebay options that are inexpensive enough for both fork and stems.
But if you insist - 1 1/8" steel steerers tend to be happy enough to accept 1" quill stems, so all you need is a workaround to to do the headset adjustment, and some way to lock it in. If you hammer a star nut all the way down to the bridge of the fork you can use a threaded rod, a piece of tube to go over the steerer and a crosspiece to get the compression right. A 28.6 seat clamp can be used to lock it in. Insert quill stem and ride away into the sunset
But if you insist - 1 1/8" steel steerers tend to be happy enough to accept 1" quill stems, so all you need is a workaround to to do the headset adjustment, and some way to lock it in. If you hammer a star nut all the way down to the bridge of the fork you can use a threaded rod, a piece of tube to go over the steerer and a crosspiece to get the compression right. A 28.6 seat clamp can be used to lock it in. Insert quill stem and ride away into the sunset
Thread
Thread Starter
Forum
Replies
Last Post
Pukeskywalker
Bicycle Mechanics
12
05-01-14 12:01 PM
yunsok80
Singlespeed & Fixed Gear
12
04-12-12 10:43 AM
virtualelvis
Bicycle Mechanics
8
11-16-10 07:23 PM