Basic hub service
#1
Unlisted member
Thread Starter
Join Date: Dec 2005
Location: Chicagoland
Posts: 6,192
Bikes: Specialized Hardrock
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1376 Post(s)
Liked 432 Times
in
297 Posts
Basic hub service
I've looked for an online tutorial on this, but didn't find one in the usual (Park Tools and Harris Cyclery) sites. I think I've got enough background on how to do this for my Specialized Hardrock, but I'm hoping someone here can point me to one I haven't seen yet.
I've adjusted bearings many times for drum brakes on my older cars as well as the tempremental and complicated tapered roller bearings on the steering head of my first motorcycle when I rebuilt the front end. But I haven't had to dish a wheel yet, is that common when doing basic hub service on a bicycle? What else is unique to bicycle service? Thanks in advance!
I've adjusted bearings many times for drum brakes on my older cars as well as the tempremental and complicated tapered roller bearings on the steering head of my first motorcycle when I rebuilt the front end. But I haven't had to dish a wheel yet, is that common when doing basic hub service on a bicycle? What else is unique to bicycle service? Thanks in advance!
#2
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,671
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5767 Post(s)
Liked 2,541 Times
in
1,407 Posts
If the wheel is correctly dished and aligned in the first place it won't change when doing hub service, so there's no need to touch the spokes.
The spokes are on the shell which is unaffected and will be in the same place after service as it was before. The only time hub service would affect dish is when you respace the axle which would move the shell to one side or the other with respect to the axle's locknut faces.
The spokes are on the shell which is unaffected and will be in the same place after service as it was before. The only time hub service would affect dish is when you respace the axle which would move the shell to one side or the other with respect to the axle's locknut faces.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#3
Constant tinkerer
+1 Dishing involves the spokes and rim. Hub service can be accomplished even without the hub being laced up to anything.
Reading the two articles "Cone Adjustment" and "Hub Overhaul" should take care of it:
https://www.sheldonbrown.com/cone-adjustment.html
https://www.sheldonbrown.com/tooltips/hubs.html
Reading the two articles "Cone Adjustment" and "Hub Overhaul" should take care of it:
https://www.sheldonbrown.com/cone-adjustment.html
https://www.sheldonbrown.com/tooltips/hubs.html
#4
Really Old Senior Member
If you need to redish the wheel after hub service, you reassembled the parts wrong.
https://www.parktool.com/blog/repair-...es/hub-service
https://www.parktool.com/blog/repair-...es/hub-service