BB tips and tools - 90's shimano
#1
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Oregon
Posts: 168
Bikes: 1978 nishiki 2011 Kona Dr.Good 1996 trek 830, 1996 Iron Horse MT400, 89 Specialized Hardrock,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
BB tips and tools - 90's shimano
working on a 97 Giant Rincon
just checking with you guys before i screw anything up ...
the lockring in the picture has to go CCW or CW to remove ??
what park tool would you use to remove the cup ... bbt-22 or bbt-32 ?? or something else ??
sorry for the blurry pic
thanks for the info
just checking with you guys before i screw anything up ...
the lockring in the picture has to go CCW or CW to remove ??
what park tool would you use to remove the cup ... bbt-22 or bbt-32 ?? or something else ??
sorry for the blurry pic
thanks for the info
#2
Senior Member
Join Date: Jun 2011
Location: Sunnyvale, California
Posts: 1,180
Bikes: Bridgestone RB-1, 600, T700, MB-6 w/ Dirt Drops, MB-Zip, Bianchi Limited, Nashbar Hounder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Non-drive side? should be CCW to remove both. Either tool should work. The bbt-22 lets you use either 3/8th inch drive socket or big 32mm wrench to torque off the cup. The bbt-32 only supports 32mm wrench, but is more compact and less expensive.
#3
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Oregon
Posts: 168
Bikes: 1978 nishiki 2011 Kona Dr.Good 1996 trek 830, 1996 Iron Horse MT400, 89 Specialized Hardrock,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
yes .. the pic if non-drive side.... thanks !
#4
Really Old Senior Member
That's a cup & cone that looks like a cartridge except for the lock ring.
Remember the DS is LH threaded.
Depending on how well your BB tool fits, you may want to use an 8MM bolt & stack of washers/spacers to hold the tool snug to the cup on the fixed side.
A little penetrating oil & soak time in advance would be a good idea.
Adjustable cup shouldn't give those issues, but a bit of P oil still can make things easier.
You'll need an HCW-5 or similar for the lock ring. Big water pump pliers, hammer & screw driver etc., depending on if you are servicing or replacing.
Remember the DS is LH threaded.
Depending on how well your BB tool fits, you may want to use an 8MM bolt & stack of washers/spacers to hold the tool snug to the cup on the fixed side.
A little penetrating oil & soak time in advance would be a good idea.
Adjustable cup shouldn't give those issues, but a bit of P oil still can make things easier.
You'll need an HCW-5 or similar for the lock ring. Big water pump pliers, hammer & screw driver etc., depending on if you are servicing or replacing.
Thread
Thread Starter
Forum
Replies
Last Post
mikemowbz
Bicycle Mechanics
7
02-28-12 11:10 AM