Help! What is the internal diameter of a 26.2 alloy seat post?
#1
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Englandshire UK
Posts: 216
Bikes: Harry Hall, Vitus 979, Viscount Aerospace, Dawes Galaxy
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 7 Times
in
1 Post
Help! What is the internal diameter of a 26.2 alloy seat post?
OK, I have a classic seized seat post, I've been through all the usual options and now I'm left with the hacksaw option!
I just wondered if someone can tell me the internal diameter of a 26.2mm alloy post. I'm trying to work out what size hacksaw blade I can get down there, before I cut the top off. I have some metal hacksaw blades that are 10mm deep and 300mm long. Will a 10mm blade fit down the post?
I don't have a post to hand at the moment to check!
I just wondered if someone can tell me the internal diameter of a 26.2mm alloy post. I'm trying to work out what size hacksaw blade I can get down there, before I cut the top off. I have some metal hacksaw blades that are 10mm deep and 300mm long. Will a 10mm blade fit down the post?
I don't have a post to hand at the moment to check!
#4
Banned
Yea its pretty much about the wall thickness of the seat post tube.
cheaper seat posts go thicker for safety ..
cheaper seat posts go thicker for safety ..
#5
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,696
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5774 Post(s)
Liked 2,571 Times
in
1,423 Posts
Before cutting the top off. Clamp it in a vise and try turning the frame.
If you can get it to budge, you'll be able to work it out if you're patient. Once it's moved the real concern is that the heat of working it out will cause it to weld or further seize in the frame. So keep adding penetrating oil and work slowly, resting it to cool often, once you've got it to where you can rotate it all the way around, put the post in the vise and work the frame while pulling it away, but don't let it get too hot.
If you can get it to budge, you'll be able to work it out if you're patient. Once it's moved the real concern is that the heat of working it out will cause it to weld or further seize in the frame. So keep adding penetrating oil and work slowly, resting it to cool often, once you've got it to where you can rotate it all the way around, put the post in the vise and work the frame while pulling it away, but don't let it get too hot.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.