Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

difference between 39 and 38 tooth chainring?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

difference between 39 and 38 tooth chainring?

Old 07-11-12, 06:40 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Jun 2012
Location: harrisburg, pennsylvania
Posts: 351

Bikes: 1976 Schwinn Super Le Tour, tricked out with modern components. Shimano Alfine 11 internal gear hub. Dynamo hub. Titanium racks and bottle cages. Mercier Kilo Wide Tire dropbar singlespeed

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 8 Times in 1 Post
difference between 39 and 38 tooth chainring?

If I switch my 39-tooth inner chainring to a 38-tooth will there be a measurable lowering of the gearing? Say I'm in my biggest-tooth/lowest-gear cassette gear and were able to switch between a 39 and 38 tooth chainring, would I feel a difference? I'm exploring chainring options without having to change my bottom bracket parts.
motorapido is offline  
Old 07-11-12, 06:51 PM
  #2  
AEO
Senior Member
 
AEO's Avatar
 
Join Date: Jun 2007
Location: A Coffin Called Earth. or Toronto, ON
Posts: 12,258

Bikes: Bianchi, Miyata, Dahon, Rossin

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 5 Posts
negligible difference.

This is all about gear ratios.

39:27 = 1.444
38:27 = 1.407

which ends up at around 1/4mph difference in the low range.
https://home.earthlink.net/~mike.sherman/shift.html
__________________
Food for thought: if you aren't dead by 2050, you and your entire family will be within a few years from starvation. Now that is a cruel gift to leave for your offspring. ;)
https://sanfrancisco.ibtimes.com/arti...ger-photos.htm

Last edited by AEO; 07-11-12 at 06:56 PM.
AEO is offline  
Old 07-11-12, 07:07 PM
  #3  
Mechanic/Tourist
 
Join Date: Apr 2007
Location: Syracuse, NY
Posts: 7,522

Bikes: 2008 Novara Randonee - love it. Previous bikes:Motobecane Mirage, 1972 Moto Grand Jubilee (my fave), Jackson Rake 16, 1983 C'dale ST500.

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 486 Post(s)
Liked 11 Times in 11 Posts
For any change in front or rear it is simply the difference in teeth divided by the orginal tooth count, expressed as a percent. So 1/39 * 100 = 2.56% difference in gear ratio, speed or distance covered in a crank revolution.
cny-bikeman is offline  
Old 07-11-12, 07:48 PM
  #4  
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,544

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5703 Post(s)
Liked 2,430 Times in 1,343 Posts
While there's almost no real difference in the gears either will yield (2.5% or so) it can make a difference. Not in the low gear because 2.5% won't make or break anything, but it can affect the spread of the middle gears. Typical steps in a 9 or 10s are between 6 & 10% or so. If you get a gear chart, compare the ratios yielded by both inners, and compare them to the outer's ratios.
One may yield a gear progression about 1/2 step between those with the outer, while the other may be very close to duplicating them. So with one you get a nice batch of very closely spaced mid ratios (those that work well with either chainring) while with the other you don't.

Not a big deal, but if you've ever been on a shallow grade, or working a headwind and wished you had a gear between the 15 an 16, you'll be happy you could find one using the other chainring.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Old 07-11-12, 09:46 PM
  #5  
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
a 135mm bolt circle, 39 is all you have, 130 will let you drop that 1 tooth smaller..
fietsbob is offline  
Old 07-11-12, 10:20 PM
  #6  
Senior Member
 
DannoXYZ's Avatar
 
Join Date: Jul 2005
Location: Saratoga, CA
Posts: 11,736
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 109 Post(s)
Liked 9 Times in 6 Posts
difference is: 39-38 = 1 tooth !!!
DannoXYZ is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mja024
Bicycle Mechanics
25
01-09-16 05:09 PM
KC8QVO
Bicycle Mechanics
66
05-26-14 09:42 AM
Gdando
Classic & Vintage
9
02-01-14 11:30 AM
jesspal
Bicycle Mechanics
15
05-20-12 04:50 PM
cL0h
Bicycle Mechanics
11
08-17-10 10:16 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.