Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

creaking sram dual drive internal hub

Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

creaking sram dual drive internal hub

Old 10-19-13, 05:02 PM
  #1  
jeff51
Member
Thread Starter
 
Join Date: Mar 2010
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
creaking sram dual drive internal hub

hi, much appreciate some advice.

i've a new uss swb recumbent set up with a 3x9 dual drive sram internal rear hub, with a shimano bar end shifter.

when i'm in highest gear on 9 speed derailleur (chain on smallest cog on cassette in back) and torque the pedals, i get a creaking noise from the internal gear. doesn't matter which of the three gears in the internal hub i'm in.

i've played around with the position of the bar end shifter, and that doesn't matter either. that is, i try to adjust wire tension to eliminate the creaking by toggling the bar end shifter lever, but there is no shift lever position in any of the three speeds for the internal hub that eliminates the creaking noise.

the wheel is tight in the dropouts.

thanks a lot for thoughts on what problem might be (and how to fix it),

jeff

http://bicycletouringoncarfreepaths.org/
jeff51 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.