2x/3x rear wheel build
#1
Running on plenty
Thread Starter
2x/3x rear wheel build
Does anyone have a reference image of a 32H 2x NDS/3x DS rear wheel?? My spokes at the valve are not running parallel, which I understand is a factor of the mismatched crossing numbers, but I just want to be satisfied that I'm not way off in terms of how I've started the 2x NDS.
Build info:
Campagnolo Veloce 32H hub
Velocity Razor grey ano rim
Pillar TB stainless spokes
Brass nipples
Jim
Build info:
Campagnolo Veloce 32H hub
Velocity Razor grey ano rim
Pillar TB stainless spokes
Brass nipples
Jim
#2
Banned
maybe the builder started with the wrong hole in the rim to put the 1st spoke in.
your picture 1st.
your picture 1st.
#3
Running on plenty
Thread Starter
I'm the builder...so it is entirely possible that it is in the wrong spot. I can post a pic later, as the wheel is at home and I am at work. If anyone has done/seen others, I just need to see if the classic 'parallel spokes to valve hole' is possible on a hybrid cross pattern wheel.
Jim
Jim
#4
Banned
My hybrid : late 70's era Campag High /low flange I used 3X the short Rt side , 4X on the long, low side ..
it all worked out.
You may have to loosen everything and start over.. from spoke one.. done that a time or 2 myself.
it all worked out.
You may have to loosen everything and start over.. from spoke one.. done that a time or 2 myself.
Thread
Thread Starter
Forum
Replies
Last Post
shnibop
Bicycle Mechanics
9
03-07-12 03:59 PM