attempting sevice on Dura ace wheel hubs
02-10-14, 12:36 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2012
Posts: 73
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
attempting sevice on Dura ace wheel hubs
Have a set of 7850 c24-TL,pulled front wheels off,can I pull the seals out of front hub? Most info. found is on rear hubs,said you should not remove left sided seal.Any hints or help appreciated........Thanks
02-10-14, 01:47 PM
#2
Senior Member
https://bike.shimano.com/media/techdo...9830700359.pdf
I would guess that the seals are removable to be able to clean the bearings and cups.
I would guess that the seals are removable to be able to clean the bearings and cups.
02-18-14, 03:15 PM
#3
Senior Member
Thread Starter
Join Date: Mar 2012
Posts: 73
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks,Davidad,finished front wheel,went pretty good....will try rear next.Bought a 850ml tub of Motorex 2000,material data saftey sheet lists the same German Co. as Dura Ace grease.....should be close to the same thing.Used a 35cc syringe with a plastic needle as a grease gun,just big enough to load up with the plastic plate w/ hole in middle.
Thread
Thread Starter
Forum
Replies
Last Post
CmereTme
Track Cycling: Velodrome Racing and Training Area
2
08-30-18 05:33 AM
